產品展示

Peppers防爆格蘭頭（Peppers CWLE type glands）

點擊瀏覽大圖收藏此產品

公司名稱：
更新時間：
所在地：
生產地址：
瀏覽次數：

上海頤品自動化科技有限公司
2017-12-04 22:05:49
上海
上海頤品自動化，熱線：13818772521
1907

【簡單介紹】

EPIN英國Peppers防爆格蘭，英國Peppers防爆變徑接頭，英國Peppers防爆堵頭，英國Peppers防爆呼吸閥，英國Peppers防爆密封接頭，英國Peppers防爆螺紋適配接頭，上海頤品自動化，技術：

【詳細說明】

英國Peppers防爆格蘭系列Peppers cable Gland

上海頤品自動化，：

Including type No’s:

C	1	W	B	*	E	*
	3	X	S	IE		R
		Z

“C” type single compression glands, certified Increased Safety Ex e are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Group II. The gland is suitable for cables that exhibit “cold flow” characteristics, whilst providing an IP66 environmental seal on the cable outer sheath and a detachable armour specific clamping system for wire (W), braid (X) or tape (Z) armoured cables. The “IE” version allows the gland to be used with HV cables where the fault load is greater than 10.4kA and options are available for use with LSOH cables and extreme temperature applications.

COMPLIANCE STANDARD

EN 60079-0, EN 60079-7, EN 60079-7,
EN 61241-0, EN 61241-1
IEC 60079-0, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529

CERTIFICATION

ATEX II 2 GD Ex e II / Ex tD A21
IECEx Ex e II / Ex tD A21
GOST-R Ex e IIU
CSA Ex e II Class I Zone 1
Class I Division 2, Groups A, B, C & D
Class II Division 2, Groups E, F & G
Class III, Enclosure Types 3, 4 & 4X
NEPSI Ex e II
INMETRO BR - Ex e II / Ex tD A21
ABS 1-1-4/7.7, 4.8-3/1.7, 4-8-3/13 and 4-8-4/27.5
MODU Rules 4-3-3/9
LLOYD’S Enclosure Systems (Part 1B)
RMRS Part XI of Rules for sea-going ships (ed.2008)

CERTIFICATE NO.

ATEX SIRA01ATEX1271X
IECEx SIR 07.0097X
GOST-R POCC GB.06.B00853
CSA CSA 1356011
NEPSI GYJ06187X
INMETRO NCC 5878/09 X
ABS 09-LD463991-PDA
LLOYD’S 10/00056
RMRS 09.00784.011

APPLICATION

EExd Equipment	Other Equipment
Gas Group II, Zones 1 and 2	Ignitable Dust, Zones 21 and 22

IP RATING

IP66 & NEMA 4X

MATERIALS

Brass or Stainless Steel

VARIATIONS

Integral Earth version for HV applications:
Brass (CWLIEE); 316 Stainless Steel (CWLSIEE)

OPTIONS

Reduced Bore Seal

PVC Shroud (C) - PCP Shroud (P) - LSOH Shroud (3)

K or V

Locknut, Earth Tag & Nylon (K) or Fibre (V) IP Washer

Including Serrated Washer

Quantity per kit

Nickel Plated (NP) - Zinc Plated (ZP)

OPERATING TEMPERATURES

Standard Seals -20ºC to +85ºC
Silicone Seals -60ºC to +180ºC

OPTIONAL ACCESSORIES

Locknut: Brass (ACBLN) / Stainless Steel (ACSLN)
Earth tag: Brass (ACBET) / Stainless Steel (ACSET)
IP Washers: Nylon (ACNSW) / Fibre (ACFSW)
Serrated Washer: Stainless Steel (ACSSW)
Shrouds: PVC (ACSPVC) / PCP (ACSPCP) / LSOH (ACSSIO)

EXAMPLE PART NUMBERING

Sample: C1WBECK1/NP/20/050NPT
C Type of gland featuring armour specific clamping
1 Neoprene Seals (1) - Silicone (3)
W SWA (W) / SWB (X) or STA (Z)
B Brass (B) / Stainless Steel (S)
IE Integral Earth
E Ex e Certification
R Reduced Bore Seal
C PVC Shroud (C)
K Nylon
NP Nickel Plated
20 Gland shell size
050NPT 1/2”NPT Entry Thread

Gland Size

Entry Threads
Metric	NPT/BSP

Entry Thread Length
[B]

Max Across Corners
[A]

Nominal Protrusion Length

Gland Seal Range

Cable Inner Sheath [C]

Cable Outer Sheath [D]
Standard	Reduced (R)

Min

Max

Min

Max

Min

Max

Armour Acceptance Range
W	XZ

Shroud Size

16	M20 X 1.5	1/2" or 3/4"	16	26.5	60.0	-	8.4	8.4	13.5	4.9	10.0	0.90	0.15- 0.35	L24
20s	M20 x 1.5	1/2" or 3/4"	16	26.5	60.0	-	11.7	12.9	16.0	9.4	12.5	0.90- 1.25	0.15- 0.35	L24
20	M20 x 1.5	1/2" or 3/4"	16	33.0	60.0	-	14.0	15.5	21.0	12.0	17.6	0.90- 1.25	0.15- 0.50	L30
25	M25x 1.5	3/4" or 1"	16	41.4	60.0	-	20.0	20.3	27.4	16.8	23.9	1.25- 1.60	0.15- 0.50	L38
32	M32 x 1.5	1" or 1*1/4"	16	50.6	65.0	-	26.3	26.7	34.0	23.2	30.5	1.60- 2.00	0.15- 0.55	L46
40	M40 x 1.5	11/4" or 11/2"	16	60.5	75.0	-	32.2	33.0	40.6	28.6	36.2	1.60- 2.00	0.20- 0.60	L55
50s	M50 x 1.5	1*1/2" or 2"	16	71.5	75.0	-	38.2	39.4	46.7	34.8	42.4	2.00- 2.50	0.20- 0.60	L65
50	M50 x 1.5	2”	16	71.5	75.0	-	44.1	45.7	53.2	41.1	48.5	2.00- 2.50	0.30- 0.80	L65
63s	M63 x 1.5	2" or 2*1/2"	19	88.0	75.0	-	50.1	52.1	59.5	47.5	54.8	2.50	0.30- 0.80	L80
63	M63 x 1.5	2*1/2"	19	88.0	75.0	-	56.0	58.4	65.8	53.8	61.2	2.50	0.30- 0.80	L80
75s	M75 x 1.5	2*1/2" or 3"	19	99.0	85.0	-	62.0	64.8	72.2	60.2	68.0	2.50	0.30- 1.00	L90
75	M75 x 1.5	3”	19	99.0	85.0	-	68.0	71.1	78.0	66.5	73.4	2.50	0.30- 1.00	L90
80	M80 x 2	3" or 3*1/2"	25	115.2	110.0	-	72.0	77.0	84.0	71.9	79.4	3.15	0.45- 1.00	L104
80H	M80 x 2	3" or 3*1/2"	25	115.2	110.0	-	72.0	79.6	90.0	75.0	85.4	3.15	0.45- 1.00	L104
85	M85 x 2	3" or 3*1/2"	25	115.2	110.0	-	78.0	79.6	90.0	75.0	85.4	3.15	0.45- 1.00	L104
90	M90 x 2	3*1/2" or 4"	25	125.7	110.0	-	84.0	88.0	96.0	82.0	91.4	3.15	0.45- 1.00	L114
90H	M90 x 2	3*1/2" or 4"	25	125.7	110.0	-	84.0	92.0	102.0	87.4	97.4	3.15	0.45- 1.00	L114
100	M100 x 2	3*1/2" or 4"	25	125.7	110.0	-	90.0	92.0	102.0	87.4	97.4	3.15	0.45- 1.00	L114
All Dimensions are in Millimetres
NOTES: Gland size does not necessarily equate to the entry thread size. Gland size 16 is also available with an M16 x 1.5 entry thread. The IP O-ring seal option is only available on metric entry threads. IP washers can be supplied for tapered entry threads. Dimensions (A) & (B) may differ for glands with non metric entry threads. Please refer to our "Thread Reference Tables" for specific dimensions. Where glands are fitted into non-metallic Ex e enclosures they must be included within the earth circuit of the system. The user should seek expert advice if intending to combine flammable and combustible dust in one environment/installation. Assembly instructions must be read prior to installation and adhered to in full. Peppers supplies cable glands with parallel entry threads that conform to the flameproof threaded joint requirements of IEC/EN 60079-1 and other equivalent standards. They usually incorporate a thread run out according to the available machining techniques and will not have a full form thread for the entire length. Peppers will not be held responsible for clients' installations where this has not been taken into account. To maintain the specified IP rating, clearance holes must be in accordance with EN 50262 Table 1 and the entry device should be suitably secured All gland kits supplied with silicone seals will include a PTFE IP washer in order to maintain the temperature range.

中國區(qū)分銷商：
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.

Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
*:

因為專業(yè)，所以放心！


留言框
感興趣的產品：	*
留言內容：
您的姓名：	*
您的單位：
聯系電話：	*
微信：
常用郵箱：
詳細地址：
省份：	*
驗證碼：	* = 請輸入計算結果（填寫阿拉伯數字），如：三加四=7
是否接受其他廠商報價:	* 匹配（1-3家）不接受