印前設備 印刷機械 印后設備 裝訂設備 廣告設備 辦公設備 印刷機械配件 其它印刷相關器材 其它印刷設備
廣東高仕電研科技有限公司
會員1.png)
廣東高仕電研科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地廣州市
包裝印刷網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2023-06-28 10:49:40瀏覽次數：659次
聯系我時，請告知來自 包裝印刷網PM-500WUA是專門為PCB客戶開發的雙組份特種UV固化字符油墨
PM-500 WUA是專門為PCB客戶開發的雙組份特種UV固化字符油墨。該產品特別適合用于雙面字符板，
在防焊顯影成像后先印刷面字符，UV預干后，即可印刷第二面。第二面可采用傳統熱固字符油墨，
絲印后直接高溫?zé)峁袒?；若使用本品，絲印后UV固化再加高溫?zé)峁袒?/span>。較傳統UV字符比，此產品兼有
熱固字符的白度高，附著力好，耐熱及耐化學性能優良等特點。
PM-500 WUA is a two-component special UV curing character ink specially developed for PCB
customers.This product is especially suitable for double-sided character board. The first
character is printed after anti-welding imaging, and the second character can be printed
directly after UV predrying, and then into UV and high temperature curing.Compared with
traditional UV characters, this product has the advantages of high whiteness, good adhesion,
good heat and chemical resistance.
一、物性General properties
| 1 | 主劑Main agent | PM-500 WUA |
| 2 | 固化劑Hardener | H-50 WT80 |
| 3 | 顏色Color | white 白色 |
| 4 | 混合比例Mixing ratio | 主劑Main agent：固化劑Hardener=85：15 |
| 5 | 混合后粘度Viscosity after mixed (at 25℃) | 180±20dPa.s |
| 6 | 混合后固體含量Non-volatile % after mixed | 82±3% |
| 7 | 混合后比重Specific gravity after mixed | 1.3±0.1 |
| 8 | 黃變性color change (IR 270℃ /15um) | ?E<1.5 |
| 9 | 保存期限Shelf life | 6個月/ 6 month after production |
| 10 | 包裝規格Package | 1Kg/Cans（罐），10Kg/Box（箱） |
二、應用操作指引Processing instructions
| 阻焊層顯影后線路板 |
| after development of the solder mask | ||
| ↓ |
| ↓ | ||
| 絲印PM-500 WUA |
| Printing PM-500 WUA | ||
| ↓ |
| ↓ | ||
| UV curing |
| UV curing | ||
| ↓ | ↓ |
| ↓ | ↓ |
| 絲印PM-500 WUA | 絲印TM-100 W01 |
| Printing PM-500 WUA | Printing TM-100 W01 |
| ↓ | ↓ |
| ↓ | ↓ |
| UV+熱固化150℃*60min | 熱固化150℃*60min |
| UV+Thermal curing 150℃*60min | 熱固化150℃*60min |
備注：TM-100 W01為高仕公司傳統熱固字符油墨。
三、Coating properties涂膜特性（IPC-SM-840E）
| 要求Requirement | 測試方法Test Method | 結果Result |
| 防霉性Nonnutrient | IPC-TM-650 2.6.1 | OK |
| 表面狀況Visual Requirements | IPC-SM-840E 3.3.1 | OK |
| 鉛筆硬度Pencil Hardness | ASTM D3363 | OK |
| 附著力（硬板）Adhesion of RPB | IPC-TM-650 2.4.28.1 | OK |
| 可加工性Mach inability | IPC-TM-650 2.4.7.1 | OK |
| 耐溶劑和清洗劑 Resistance to Solvents and Cleaning Agents | IPC-TM-650 2.3.42 涂膜無分離、裂紋、粘著 Coating shall not exhibit delamination, cracks, tackiness, swelling or permanent degradation | OK |
| 耐化學試劑 Resistance to Assembly Processes and Chemistry | IPC-SM-840E 3.6.1.2 10vol% H2SO4 20℃ 30min 10wt% NaOH 20℃ 30min | OK |
| 水解穩定性 Hydrolytic Stability | IPC-TM-650 2.6.11 | OK |
| 阻燃性Flammability | UL94 V0 E343546 | OK |
| 耐焊性 Resistance to Solder
| IPC-TM-650 2.6.8 Flux shall be a ROM0 or ROM1 per J-STD-004 助焊劑應依據J-STD-004，使用ROM0或ROM1 浮錫 Solder Float 260±5℃*10±1秒 | OK |
| 介電強度Dielectric Strength | IPC-TM-650 2.5.6.1 | 1000 V DC/mil |
| 絕緣電阻Insulation Resistance | IPC-TM-650 2.6.3.1 | ≧7.0×1012Ω |
| 耐濕絕緣電阻Moisture and Insulation Resistance | IPC-TM-650 2.6.3.1 | ≧5.0×108Ω |
備注：此資料為本公司試驗結果，不作為保證之用。適宜之條件，需參照技術資料，待貴公司實施確認后，再予以確定。
PS: This information is our test results, not as a guarantee. The suitable condition, need to consult technical data, to be your company carry out confirmation, to be determined
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
包裝印刷網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
