MS-A系列全電腦印刷開槽模切機

用途與特點:

整臺機器是按照高要求、高標準及可靠性、安全性而設計制造。

各機臺采用PLC單獨控制，彩色觸摸顯示屏，各種參數設定和顯示直觀明了。

全部電器、電子及氣動零件都采用產品。

選用優質、高標準的材料和配件。

所有主傳動齒采用特殊進口材料，經高精度研磨，經久耐用，齒輪潤滑采用油泵噴淋系統。

自動歸零、復位。

可儲存常用訂單，加快換單操作。

應用免鍵軸環，保持長期使用效果和高的印刷套準精度。

USES AND FEATURES

The whole machine is designed and manufactured in accordance with the requirements, high standards and high reliability, safety and.

The machine adopts PLC control alone, color touch screen display, parameter setting and display intuitive.

All the electrical appliances, electronic and pneumatic components adopt international famous brａnd products.

The selection of high quality, high standard materials and accessories.

All the main drive gear with special imported materials, with high precision grinding, durable, gear lubrication adopts oil pump spray system

Auto zero reset.

You can store different orders, speed up the order operation.

The key free collar, long-term effect and high printing precision.

送紙部

PAPER DEPARTMENT

1.采用叁軸（四軸），前緣滾輪送紙，送紙更準確，薄而彎曲紙板容易送入；

2.可設置紙板送程，減小拉紙輥咬送壓力；

3.可連續、隔張或單張送紙，機器計數器準確記錄生產數量；

4.以紙板前緣為基準，減少機械誤差，使印刷、開槽位置更準確；

5.采用變頻控制風量及壓力，以適應紙板的厚薄和大?。?/p>

6.采用觸摸習設定調整側擋板間隙大小，調整快捷；

7.高效吸屑除塵機可大量消除紙板印刷表面上的雜質，提高印刷品質；

8.后托紙臺采用氣、電控制前后移動，調整迅速；

9.附有強力氣缸整機主鎖，使機器運轉更平穩；

10.主機馬達啟動保護裝置---機器未鎖緊到位時，主機無法開機運轉。

1.Adopting three axes (four axis), leading edge roller to send paper, p即er feeding is more accurate, and the bending board is easy to be fed;

2.Can be set to send the board to reduce the pressure of paper roll;

3.Can be continuous, separate sheets or sheet fed, machine counter to record the number of production;

4.The leading edge of the cardboard to reduce the mechanical error, so that printing, slotting position is more accurate;

5.Using variable frequency control of air volume and pressure, in order to adapt to the board thickness and size

6.Touch screen is used to adjust the clearance of the side baffle;

7.High efficiency dust removal and dust removal machine can eliminate the impurities on the surface of cardboard printing, and improve the printing quality

8.After the use of gas, electric control, before and after the move, adjust quickly;

9.With a strong cylinder main lock, so that the machine running more smoothly;

10.Host motor start protection device一the machine is not locked in place, the host can not boot operation

印刷部

PRINTING DEPARTMENT

1.采用掛板印刷系統，換版操作方便，并設有腳踏開關，方便掛板；

2.網紋輥配梧送紙系統氣壓式自動升降裝置，（送紙時網紋輥下降與印版接觸，停止送紙時網紋輥上升與印版分離）；

3.印刷滾筒周向調整機構采用行星式齒輪制造；

4.印刷相位采用觸摸屏控制及電動數字式360度調整（運轉、停止?fàn)顟B(tài)下均可調整）；

5.著墨輥采用高精度硬鉻耐磨網紋輥；可選配陶瓷網紋輥；

6.橡膠輥采用鋼管表面包裹耐磨橡膠，經中高特殊研磨，傳墨效果好，（依客戶需要選配密封刮刀系統）；

7.印刷相位固定裝置采用電磁離合器制動式剎車機構，當機臺分離式調整相位時，剎車機構限制機臺轉動，保持原有齒輪位置固定點；

8.控制面板裝有觸摸屏，操作方便。

1.the hanging plate printing system is adopted, and the exchange plate is convenient to operate, and a foot switch is arranged

2.roller with paper feeding system pressure type automatic lifting device. (feed roller and a printing plate contact down, stop Stop feeding roller and a printing plate separation) rise.

3.printing roller circumferential adjustment mechanism using planetary gear manufacturing.

4.printing phase using touch screen control and electric digital 360 degree adjustment (operation, stop state can be adjusted)

5.inking roller adopts high precision hard chromium roller; optional ceramic roller.

6.rubber roller with steel tube surface coated with wear-resistant rubber, the middle and high special grinding, ink effect is good. According to customer needsSeal scraper system to be selected

7.the printing phase fixing device adopts an electromagnetic clutch brake mechanism The rotation of the machine is limited, and the fxed point of the original gear position is maintained

8.control panel is equipped with touch screen, easy to operate.

開槽部

SLOT DEPARTMENT

1.壓線輪、開槽刀盤軸位置調整，設有觸摸屏預計設定數據和手動調整兩種方式，調整快捷準確，生產過程中可預置下一批訂單尺寸。

2.壓線輪、送紙輪開槽刀座軸向移動，采用雙絲桿導向移動平穩，定位準確；

3.開槽相位采用伺服電機、觸摸屏控制及電動數字360度調整（運轉、停止?fàn)顟B(tài)下均可調整），并有復位功能，并可儲存訂單；

4.控制面板裝有觸摸屏，可控制送紙部、印刷問、開槽部，操作方便；

5.中刀移動，可生產大型兩版式紙箱。（選用配置）

6.刀軸送紙軸均經鍍硬鉻精磨，壽命長，移動時不發生顫動；

7.如用戶需要可配打孔裝置。

1.pressing wheels and slotting cutter axial position adjustment, a touch screen and manually adjust the preset data in two ways Adjust quickly and accurately, the production process can be preset to the next batch of order size

2.wire wheels, wheel slot knife axial movement by double wire rod guide move smooth, accurate positioning

3.slotted phase using servo motor, touch screen control and electric digital 360 degree adjustment Can be adjusted'), and has a reset function; and can store orders The 

4.control panel is provided with a touch screen, which can control the feeding part, the printing part and the slot part, and the operation is convenient

5.in the knife to move, can produce large two piece carton. (selection of configuration)

6.the paper feed shaft of the cutter shaft is plated with hard chrome finish, long life and no vibration when moving

7.if the user needs to be equipped with a drilling device

模切部

DIE CUTTING DEPARTMENT

1.膠輥采用可拆式優力膠墊設計，拆裝容易，便于更換；

2.膠輥軸向40mm左右來回移動采用液壓控制，每轉游動量可調整，移動平穩可靠；

3.模切相位采用變頻器、觸摸屏控制及電動數字式360度調整，可儲存定單；

4.電動數字式調整刀模橫向位置裝置，調整距離左右共16mm；

5.采用PLC、觸摸屏控制刀模輥和膠輥間隙；

6.膠墊輥補償采用伺服獨立馬達驅動，普通紙箱補償圍±3mm；

7.膠輥和刀模輥芯均用優質鋼制造，表面鍍硬鉻拋光，并經平衡校正，增加運轉穩定性。

1.rollers with removable rubber pad design, easy disassembly, easy replacement.

2.rollers axial back and forth about 40mm movement with hydraulic control, each turn moving adjustable, stable and reliable

3.die cutting phase inverter, touch screen control and electric digital 360 degree adjustment, can store orders.

4.electric digital adjustment tool transverse position device, adjust the distance of a total of 16mm.

5.controlled by PLC and touch screen cuYYer roller and the rubber roller gap

6.the roll compensation of the rubber pad is driven by the servo motor, and the compensation range of the ordinary cardboard box is+3m m.

7.rollers and a knife mold roll core is made of high-quality steel, hard chromium plating and polishing surface, balance correction, increase the running stability.