用途與特點:
*吸附前緣送紙系統,操作簡單,精度高。
安裝7英寸真彩觸摸屏,可以預置200組訂單、訂單查詢、零位訂單輸入、整機同步歸零、相位自動/手動調整、機器參數管理、抬落版勻墨手動/自動控制、自動顯示生產數量和生產速度以及設置生產數量。
所有傳動輥材質均為優質鋼,鍍硬鉻,表面研磨。傳動齒輪采用優質合金鋼,經熱處理,研磨而成間隙調整采用高精度蝸輪箱自鎖調整、并配有三桿圓盤手柄座,方便快捷。
開槽部采用電動控制調整各刀座軸向、縱向和箱高尺寸。
模切速差補償系統,凸輪式軟輥橫向游動40mm,腳墊磨損均勻,提高膠墊利用率,降低使用成本。
應用于3 /5 / 7層瓦楞以及E楞紙板。
送紙部
PAPER DEPARTMENT
1.*前緣送紙統,操作簡單,精度高;
2.7.5kw高壓離心風機,可以根據紙板翹曲程度調整風量,確保紙板順利進入;
3.左右擋板位置由絲杠帶動電動調整,右擋板附氣動拍齊裝置;
4.隔張送紙功能,可根據需要選擇隔張送紙,保證較大規格紙板也能加工;
5.安裝7英寸真彩觸摸屏,可以預置200組訂單、訂單查詢、零位,訂單輸入、整機同步歸零、相位自動/手動調整、機器參數管理、抬落版勻墨手動/自動控制、自動顯示生產數量和生產速度以及設置生產數量;
6.與開槽部裝有聯鎖控制開關,實現急停,停送或復位送紙,正反轉動,各機組的相們點動,傻呵呵作人性化;
7.后托紙架電動控制前后,加速設置速度;
8.采用毛刷擦塵裝置,并配有強力負壓吸塵風機,清除紙板表面的灰塵、紙屑等雜物,提高印刷質量。
1.advanced front feeding system, simple operation, high precision
2.7.5 kw high pressure centrifugal fan, can adjust the air volume, according to the cardboard warping degree to ensure smooth into cardboard About
3.baffle position by lead screw drive electric adjustment, or baffle pneumatic film device
4.every piece of paper, can choose according to need every piece of paper and cardboard of large size also can process
5.and 7 "true color touch screen installation, 200 groups can be preset orders, inquiries orders, zero. The order entry, the machine synchronous zero, phase automatic/manual adjustment
machine parameters management, lift fall edition distributing manual/automatic control, automatic display production quantity and production speed and set production quantity
6.with slot department is equipped with interlocking control switch, stop, stop sending or reset to send paper, positive and negative rotation, each unit of phase points, humanized
operation
7.after the paper holder frame before, during and after the electric control speed setting speed
8.use brush to wipe the dust device, and is equipped with a powerful negative pressure suction fan, remove dust on the surface of the cardboard, paper scraps and other sundry, improve
the quality of printing
印刷部
PRINTING DEPARTMENT
1.優質鋼制作、表面磨削、鍍硬鉻。靜平衡校正,運轉平穩,適應高速動轉;
2.輥身水平方向和圓周方向刻制基準線,方便對版;
3.棘輪固定式卷版軸掛版、設有左右兩邊鎖緊裝置,讓掛版對位更快捷準確;
4.安裝腳踏開關控制裝版滾筒正反轉,方便換版;
5.間隙調整采用高精度蝸輪箱自鎖調整、并配有三桿圓盤手柄座,方便快捷。調整范圍0-11mm;
6.采用優質無縫鋼管精致加工,鋼管表面研磨、鍍硬鉻,動平衡校正;
7.印刷相位采用PLC觸摸屏控置及電動數字式360度調整(運轉、停止均可調整);
自動歸零裝置,以保證機組有統一的調整基和空轉裝置,送紙時網紋輥下降與印版接觸,這停止送紙時網紋輥自動上升與印版分離,以保護印版;不印刷時自動空轉,防止油墨干涸。
1.the production of high quality steel, surface grinding, hard chromium plating. Static balance adjustment, stable running and adapt to the high-speed operation.
2.roll horizontal direction and circumferential direction henceforth have its official line, convenient to version.
3.ratchet fixed volume axis version, the left and right sides lock device, make hanging version registration more fast and accurate.
4.install the foot switch control plate drum positive &negative, convenient change version.
5.clearance adjustment self-locking worm gear box with high precision, and is equipped with three stem disc handle, convenient and quick.Adjusting range 0 to 11 mm.
6.delicate high quality seamless steel tube processing, steel pipe surface grinding and hard chromium plating, dynamic balancing correction.
7.printing phase PLC touch screen control and electric digital 360“adjusted (motion and stop all can be adjusted).
8.automatic zero device, to ensure that the unit has a unified adjust benchmark, testing-run a commonly can adjust the correct position, reducing waste of cardboard.
9.pressure type and automatic lifting gear roller, and idle device, feeding anilox roll down when in contact with the plate, stop feeding anilox roll automatically rise and plate separation, in order to protect the plate; Don't press automatic idling, prevent the ink dries up.
開槽部
SLOT DEPARTMENT
1.采用電動控制調整各刀座軸向、縱向和箱高尺寸;
2.間隙調整采用高精度蝸輪箱自鎖調整、配有三桿圓盤手柄座,方便快捷,調整范圍0-11mm;
3.行星式齒輪構造,適用壽命長;
4.開槽相位采用PLC觸摸屏控置及電動數式360度調整(運轉、停止均可調整),相位歸零裝置;
5.單軸雙刀開槽,箱高調整采用內齒電調結構,使?jié)櫥筒蝗菀孜廴炯埾洹2⑶蚁涓哒{整有防碰撞保護裝置,不會損壞機器;
6.采用*的彈屑式除塵裝置,操作方便。
1.adjusted by electric control knife axis, vertical and cases of high dimensions
2.clearance adjustment adopts high precision self-locking worm gear box, equipped with three stem disc handle, convenient and quick. Adjust the range of 0-11 mm
3.planetary gear structure, long service life
4.slotting phase PLC touch screen control and electric digital 360 0 adjusted (motion and stop all can be adjusted). Phase zero device
5.double slot, single axis, high box to adjust the Internal tooth electrical structure, make the lubricating oil is not easy to pollution of the cartons. And high adjusting box collision protection, not damage the machine
6.adopt unique play chip type dust removal device, easy to operate
模切部
DIE CUTTING DEPARTMENT
1.軟輥切削機構提高膠套重復使用率;
2.線速度自動補償確保每批紙箱的模切尺寸*一致;
3.凸輪式軟輥橫向游動40mm,腳墊磨損均勻,提高腳墊利用率,降低使用成本。模切相位采用電動
4.數字式360度調整(運轉、停止均可調整);
5.送紙軸,拋光研磨、鍍硬鉻,配有四個滾輪送紙;
6.送紙輥齒輪采用無側隙調節機構,調整時不影響齒輪咬合,保證傳動精度;
7.間隙調整采用高精度蝸輪箱自鎖調整,方便快捷。調整范圍0-11mm。
1.soft roll cutting mechanism to improve slab repeat usageo
2.linear speed automatic compensation to ensure that each batch of carton die-cutting size exactly.
3.the CAM type soft roller transverse moving 40 mm, MATS wear uniform, improve the utilization rate of foot pads to reduce the cost. Die-cutting phase adopts electric 4,
4.360 0 digital adjustment (motion and stop all can be adjusted).
5.paper feed axis, polishing, plating hard chromium, equipped with four wheel feed.
6.the feed roller gear are no clearance regulating mechanism, adjustment does not affect the gear wheels, guarantee the transmission accuracy.
7.clearance adjustment self-locking worm gear box with high precision, convenient and quick. Adjusting range 0 to 11 mm.
請輸入賬號
請輸入密碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,包裝印刷網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。