DZF1300-E型真空吸附式半自動覆面機當裱貼彩印的面紙較薄并且有卷曲的情況下，機器的速度不可開得過快，裝面紙和瓦楞紙板時，它們左右相對的位置要對準，以免因?yàn)槌黾埗ㄎ怀霈F(xiàn)偏向誤差，產生橫向裱貼不準，為了面紙和瓦楞紙板裱貼位置準確無誤，機器的生產速度要根據面紙的特點合理掌握；裝紙時要將面紙和瓦楞紙板的相對位置對準；上，下鏈條的行程   準確；上，下紙對準后要將堆紙臺的擋紙限位裝置固定好。

After aligning with the relatively reasonable grasp the characteristics of production when the adsorption DZF1300-E type vacuum type semi automatic laminator laminating color printing tissues thinner and curly, the machine speed can not drive too fast, the glossy paper and corrugated cardboard, they are about the relative position to be aligned, lest because the paper positioning deviation error, transverse mounted allowed, in order to ensure the glossy paper and corrugated cardboard mounted position is accurate without any error, the machine speed according to the tissues; paper to glossy paper and corrugated cardboard position alignment, the chain of travel must be accurate, the paper to paper pile retaining paper limit device is fixed.

DZF1300-E型真空吸附式半自動覆面機用途與特點：

1、自動送底紙，正面推面紙，具有送紙輕松，降低勞動強度。

2、前規定位底紙超前，適合卡紙與卡紙貼合，卡紙與A、B、C、D、E型瓦楞紙板貼合。

4、底紙、面紙貼合前后可調，輕松對貼。

5、供膠系統由液位繼電器自動控制，膠層厚度可調涂膠均勻，節省膠水用量。

6、電機采用無級調速，電磁離合器采用無觸點因態繼電器，行程位置采用光電開關檢測，電子自動計數及空張光電自動控制。

7、貼合精度高，貼合后的成品具有紙面平整，邊緣整齊，，剛性好等特點。

8、電廂技術含量高，帶有自動計數功能。

9、整體結構緊湊、外形美觀、工作

DZF1300-E型真空吸附式半自動覆面機技術參數：