本儀器是既可測量高電阻，又可測微電流。采用了美國In公司的大規模集成電路以及技術,使儀器體積小、重量輕、準確度高。以雙3.1/2 位數字直接顯示電阻的高阻計和電流。量限從1×104Ω ～1×1018 Ω，是目前國內測量范圍Z寬，準確度Z高的數字超高阻測量儀。電流測量范圍為2×10-4 ～1×10-16Ａ。機內測試電壓為10/50/100/250/500/1000V任意可調。本儀器具有精度

北京北廣精儀儀器設備有限公司鄭重聲明：* ，如有需要：請搜索（北京北廣精儀儀器設備有限公司）

體積電阻率表面電阻率測試儀  型號：BEST-121

五、儀器特征

本儀器測量采用三電極法對試樣進行測試，其試驗裝置主要有平板式電極裝置和高阻計兩部分組成。基本原理是對試樣加入不同擋位的直流電壓，流經試樣的微弱電流用標準電阻取樣放大后，從高阻計上讀出。數字直接顯示出電阻值,精度高、顯示迅速、穩定性好、讀數方便。技術指標1、采用高集成度的3 1/2位數字顯示。2、量程范圍：1×105Ω ～1.999×1014 Ω

3、測試電壓為DC100V或DC500V或用戶訂制

4、工作環境溫度：20℃±2℃，濕度：35%±10%RH

5、儀器在穩定的工作電壓及無信號輸入時1--8小時之間零點漂移小于±5%

6、儀器對標準電阻測量的基本誤差：≤±10% 

六、 技術參數 

·         型 號 SB36固體（液體）體積電阻率及表面電阻率測試儀

·         額定電壓 10 100 250 500 1000 準確度 ±5 % 

·         電阻測量 1* 106～1* 1017準確度 ±10 % ±20 % 

 ·         微電流測量 1* 105～1* 1014準確度 ±10 % ±20 % 

·         外形尺寸/重量（MM /KG） 380W * 260D * 150H / 10 主要用途及特點: 

·         適用于科研、工廠、學校、企業部門對絕緣材料、電工產品、電子設備以及元件的絕緣測量和高阻值兆歐電阻的測量也可用著微電流測量，是一種直讀式和微電流兩用儀器。 

測試電壓（V） 誤 差 

DC—10V ±5% 

DC—50V ±5% 

DC—100V ±5% 

DC—500V ±5% 

DC—1000V ±5% 

Volume resistivity of surface resistivity tester

Digital high resistance, a current measuring instrument type: EST-121: volume resistivity, surface resistivity uses: Instrumentation Test

One, volume resistivity surface resistivity tester overview

This instrument can measure high resistance, and measuring current. The American company In large scale integrated circuit and patented technology, the instrument has the advantages of small volume, light weight, high accuracy. Dual 3.1/2 digital display the resistance high resistance meter and current. Limit from 1× 104 Ω～ 1× 1018 Ω, is currently the most wide measurement range, the most accurate digital ultra high resistance meter. Current measurement range of 2× 10-4 ～ 1× 10-16A. The built-in test voltage is 10/50/100/250/500/1000V adjustable. The instrument has the advantages of high precision, good stability, showing a rapid, easy reading, applied to anti-static products such as anti-static shoes, anti-static plastic rubber products, computer room anti-static floor activities such as the resistance value of the test as well as insulating materials electrical and electronic products insulation resistance measurement. The instrument can measure the resistance, and can directly measure the weak current. 

Instrument is fully consistent with and better than the national standard GB1410 " solid electrical insulating materials, insulation resistance, volume resistivity and surface resistance test method " and " American Standard ASTM D257 DC resistance or conductance of insulating materials test methods " and other standards.

Two, volume resistivity surface resistivity tester main features

Resistance measuring range 0.01× 104 Ω～ 1× 1018 Ω

Current measurement range of 2× 10-4A ～ 1× 10-16A

Small volume, light weight, high accuracy

Resistance, current double display

Good performance is stable, easy reading

All the test voltage （ 10/50/100/250/500/1000V ） test resistance results in reading, is removed from the old high resistance meter in different test voltage or different scale should be multiplied by the coefficient of the inconvenient trouble, allowing the measurement of high resistance as the multimeter is used to measure the general resistance of samples is simple.

Not only can measure high resistance and micro current

Wide application: applied to anti-static products such as anti-static shoes, anti-static plastic rubber products, computer room anti-static floor activities such as resistance testing electrical and electronic products insulation resistance measurement

Three, volume resistivity surface resistivity tester technical indicators

The 1 resistor measurement range: 0.01× 104 Ω～ 1× 1018 Ω.

The 2 current measurement range : 2 × 10-4A～ 1 × 10-16A

3 double header display: 3.1/2 LED display

4 built-in test voltage: 10V, 50V, 100V, 250, 500, 1000V

5 basic accuracy: 1% （ note ）

6: use environment temperature: 0℃ ~ 40 ℃, relative humidity <80%

7 built-in test voltage: 10/50/100/250/500/1000V arbitrary switching

The 8 power supply forms: AC 220V, 50HZ, power consumption is about 5W

Four, volume resistivity surface resistivity meter working principle

According to the Ohm's law, the measured resistance is equal to voltage is applied through Rx V divided by the current I. The traditional high resistance meter is the working principle of measuring voltage V fixed, by measuring the current flows through the sampling resistor I to get the value of resistance. From Ohm's law can be seen, because the current I is inversely proportional to the resistance, but not proportional to the resistance, so the display value is nonlinear, namely the resistance to infinity, the current is zero, i.e., zero is∞, in the vicinity of the scale is very dense, with a low resolution. The scale is nonlinear. Because the measurement of different resistance, the voltage V also vary, so the average high resistance meter is poor accuracy, low resolution.

At the same time measure the voltage across the resistor V and the current through the resistor I, through the interior of the large scale integrated circuit to complete the voltage divided by the current calculation, and then the results obtained after A/D conversion to digital show resistance, even if the voltage across the resistor V and the current through the resistor I is changed at the same time, the display resistance value is not as common due to high resistance meter that measured voltage or current change of V I change, so, even if the measured voltage, resistance, power supply voltage is measured the changes in the results have little effect, the measurement accuracy is very high （ patent ）, theoretically the error can be zero, while the actual error can be done a few thousandths or extremely few.

Typical application

1 measurements of anti-static shoes, conductive shoes resistance value

2, measurement of the antistatic material resistance and resistivity

3, measurement computer room with movable floor system resistance

4, measurement of insulation resistance （ rate）

5, photodiode dark current measurement

6, physics, optics and materials research

Canton company other insulating materials testing instruments:

BDJC-0-100KV dielectric breakdown testing instrument

BDJC series insulating materials at power frequencies of dielectric breakdown test instrument

BDJC series voltage dielectric strength test apparatus

BDJC series voltage breakdown testing instrument

BDJC series insulating paint film breakdown strength tester

BDJC capacitor voltage breakdown testing instrument

EST-121 volume surface resistivity measuring instrument

GDAT-A dielectric loss tester / dielectric constant test

GDAT-C model dielectric constant dielectric loss tester

BDH leakage resistance tester

BDH-B arc resistance tester