IC800SS1228RD2是阿格FANUC VersaMotion伺服電機控制器。該控制器是一個180-250伏交流設備，具有三相輸入。它支持DeviceNet編程。控制器具有位置反饋、一個串行端口以及八個離散輸入和輸出。設備的前面板還顯示模塊狀態、網絡狀態、地址/代碼和正向/反向。雙字符LED顯示屏允許使用助記顯示進行實時診斷更新，如“好的"，“OV"（代表馬達過電壓，）LE（對于失去啟用，）等等.

IC800SS1228RD2設計用于特定系列的電機。這包括MTR-3S45-H、MTR-3S46H、MTR-3S63-G、MTR-3S65-G、MTR-3S67-G、MTR-3T45-1、MTR-3T54-H和MTR-3T55-H .這些電機的連續失速扭矩范圍為32至150.3英寸-磅，額定轉速范圍為1，400至5，300轉/分。具體信息請參考通用電氣數據表。

十多年前，通用電氣發那科公司將惠德科公司的IMJ型號并入S2K系列。如果您要更換其中一個控制器，請注意IC800SSI216RD2兼容一把IMJ 31GD-2d伺服電機控制器，帶DeviceNet的16A解析器反饋。

IC800SS1228RD2的工作溫度為0至50攝氏度。它的儲存和運輸溫度為-40至80攝氏度，濕度為5%至95%（非冷凝）。散熱器方向必須垂直。請注意該裝置的額定工作深度為3300英尺；在咨詢通用電氣公司之前，不得進行更高海拔的操作。該模塊的安裝設計為四周留有3英寸的間隙，以便有效冷卻。

The IC800SS1228RD2 is a GE FANUC VersaMotion Servo Motor Controller. This controller is a 180-250 VAC device with a 3-phase input. It supports DeviceNet programming. The controller has position feedback, a serial port, along with eight discrete inputs and outputs. The device’s front panel also displays module status, network status, address/code, and Fwd/reverse. The two-character LED display allows real-time diagnostic updates using mnemonic displays like “OK," OV" (for motor over voltage,) LE (for Lost enable,) etc.

The IC800SS1228RD2 is designed to be used with a specific series of motors. This includes MTR-3S45-H, MTR-3S46H, MTR-3S63-G, MTR-3S65-G, MTR-3S67-G, MTR-3T45-1, MTR-3T54-H, and MTR-3T55-H. These motors range from 32 to 150.3 in-lb of continuous stall torque with rated speeds from 1,400 to 5,300 RPM. Please consult GE data sheets for specific information.

Over a decade ago, GE Fanuc incorporated Whedco Inc. IMJ models into the S2K series. If you are replacing one of these controllers, please note the IC800SSI216RD2 is compatible to a IMJ-31GD-2-D Servo Motor Controller, 16A Resolver Feedback with DeviceNet.

The IC800SS1228RD2 has an operating temperature of 0 to 50 degrees Celsius. Its storage and shipping temperatures are -40 to 80 degrees Celsius, with humidity of 5 to 95% non-condensing. The heat sink orientation must be vertical. Please note this unit is rated for operation to 3,300 feet; higher altitude operation should not occur before consulting with GE. The module is designed for installation with a clearance of 3 inches on all sides for effective cooling.