整臺機器是按照要求，可靠性功能及安全性而設計制造。
選用優質材料及配件，所有傳動輥材質均為優質鋼，鍍硬鉻、表面研磨。
采用進口傳動齒輪，傳動齒輪加硬研磨而成，洛氏硬度＞60度。
采用免鍵連接環，減少中心磨損虛位放大，保持長期印刷套準。
自動歸零。自動復位。
機油自動平衡裝置，保持各個單元機油同一水平。
獨立電腦控制臺，可儲存常用訂單、換單快捷，操作方便。
整機各單元自動獨立分離，操作方便，行走時持續響鈴警示，確保操作人員安全。
傳送輥、壓印輥、網紋輥的間隙采用電動控制調整。
紙塵式收集系統。

進紙部
送紙部功能
前緣式送紙方式，可根據紙板彎曲程度調整風量，確保送紙順暢。
主機馬達啟動保護裝置，機臺未固定時，減少壓扁送入的紙板。
可連續或隔張送紙。
雙進紙橡膠輥，橡膠輥有防超壓溝槽，減少壓扁送入的紙板。
前進紙橡膠輥鋪氣缸緩壓裝置，進紙準確、可靠，不會因進紙間隙小而破壞進入紙板的強度。
左右擋板位置電動數字式控制。（可加氣動自動拍齊）后檔箱電動調整，前檔版間隙手動同步調整。
除塵裝置，除塵毛刷和吸塵風機可清除紙板表面灰塵。 可按紙板尺寸分段調整除塵風口。
電動控制機臺離合并附警鈴，確保操作人員安全。
電子計數可設定生產量，到達設定產量自動報警。（可直接觸摸屏顯示生產量。）

Function of Feeding Department：
Adopt sun feeder,Wind absorbing auxiliary paperboard feeding,can make the cardboard feed favoringly. The volume of the wind can be adjusted acord the camber of the paperboard.
Start protecting device of the main motor,when the machine-platform not been locked, the main motor can not running.
Continuous and skip cardboard feeding,counting device is install.
Double rubber rollers for feeding,the rubber roller have slot for preven the overlarge pressure.
The feeding roller is rubber with cylinder cushioning device,precise feeding,will not destroy the hardness of the cardboard when feeding space is small.
The side baffles adopt electrical control with data display.(here can add automatic pneumatic aligning device),the back baffle box adopt electrical adjustment,the front baffles space is synchronous manual adjustment.
Brush dust-removal equipment with dust-absorption blower.Can adjust the wind volume accord the cardbard size.
Each unit is electriv moving left and right with warming bell.make sure the operator safe.
Electronic counter be used for setup for setup the production quantity,when complete the production quantity,automatic warning,(if chose the touch screen cintrol,the touch screen will display the production quatity.)

印刷部
印刷部功能：
印刷輥采用無縫鋼管，表面 研磨，鍍硬鉻，平衡校正，運轉平穩。
快速換版裝置，裝卸印版時，腳踏開關電動控制版輥的正反向轉。
送紙輥，壓印輥，膠輥，網紋輥間隙調整均采用自鎖結構。
印刷輥相位調整均采用PLC以及電動數字輸入式360度調整，停機及運轉時均可調整。
印刷輥橫向調整采用PLC及電動數字式調整，調整范圍±10mm。
印刷相位固定裝置，氣動式剎車機構，當單元分離調整或清洗時，剎車機構限制齒輪轉動，保持原有齒輪位置固定點。
網紋輥采用配合送紙系統氣壓式升降裝置（送紙時網紋輥按單元順序自動落下，停止送紙時按單元順序自動抬起。）
氣動隔膜泵上墨，自動循環，加水清洗。
擦板記憶功能，清洗印版后可回到原印刷位置。

Function of printing Department：
The printing roller adopt without gap roller,surface is treated by lapping finish,after balance aorrect and hard chrome plating,smooth in operation.
Quickly change printing plate device,foot switch for electric control control the printing roller's clockwise and anticlockwise running.
The feed roller,press roller,rubber roller and anilox roller space adjustment all adopt self-locking structure.
The phase of the printing roller adopt PLC and electric 360° adjust the error to input the sdjust data,can be adjusted while the machine running or stop.
The horizontal direction movinh of the printing roller adopt PLC and electric adjustment,accord the error to input the adjust data.the adjust scope is ±10mm.
The phase fix device adopt cylinder brake,when the unit is opened and washing,the cylinder brake device will brake all the units rolling running and keep the original location of the gears.
The autmatic Pneumatic control UP and down device of the anilox roller is synchronous with cardboard feeding system.(when the cardboard is fed,the anilox roller of esch peinting unit will automatic orderly go down. when stop feeding,the anilox roller will automatic orderly go up. )
Pneumatic membrane pump inking,automaticc circle,water washing.
With "clean printing plate memory"function,after washing the printing plate,the printing roller will running back to the original printing position.

干燥機
干燥部功能：
干燥部可選擇熱風，紅外線UV干燥系統（選購）。

Function of Dryer Unit：
Hot air,dryer,infrared dryer or UVcoating dryer system as the optional can be installed in dwell unit.

模切部
模切部功能：
膠墊輥機械螺旋式橫向移動，移動距離為40mm。
模切輥相位采用PLC及電動數字式360°調整，停機及運轉情況下均可調整。（也可選用PLC及觸摸屏調整）
模切輥與模切輥間隙調整采用自鎖結構，并配有氣缸大范圍快速調整，減少膠墊損壞，增加膠墊使用壽命。
送紙輥間隙調整采用自鎖結構。
速度補償裝置，可使優力膠輥隨模板輥滑動，從而使膠墊輥的表面速度由力模控制，使模切的紙箱與刀模形狀一致。
機器配有優力膠修正裝置，可對優力膠反復多次修整后使用。

Function of Slotting Deparment：
The rubber roller adopt mechanical control the position move left and right. The movement distance is 40mm.
The phase of the die-cutting unit adopt PLC and electic 360° adiust,accord the error to input the adjust data,can be adjust while the running or stop.(PLC with touch screen adjustment as an option)
The horizontal moving of the die roller adopt PLC and electric adjustment,input the data accord the error,adjusting distance is 10mm.(PLC with touch screen adjustment as an option)
The space adjustment between rubber roller and roller adopt self-locking struchure,with cylinder big scope quickly adjust,decrease the rubber wear,increase the rubber life.
The unique speed compensation device can make the rubber roller rolling running with the die roller,make the surface speed of the rubber cushion is completely controlled by the die roller,the shape of the carton sheet will absolutely equal to the pattern.
There is a rubber rebber reqair device with machine,the rubber can be used after be repaired.