江門市江海區科騰龍紙箱機械設備有限公司
江門市江海區科騰龍紙箱機械設備有限公司
主要機構性能整臺機器按照高要求，可靠性功能而設計制造，整機操作人性化設計，能在短時間內進行設定、修正、執行、更換、記憶功能，并以精確數據顯示
主要機構性能
整臺機器按照高要求，可靠性功能而設計制造，整機操作人性化設計，能在短時間內進行設定、修正、執行、更換、記憶功能，并以精確數據顯示。
所有傳動輥材質均為優質鋼，鍍硬鉻，表面研磨。
傳動齒輪采用優質合金鋼，鍍硬鉻，研磨而成。
只要傳動軸采用免鍵連接，減少連接間隙，保證印刷套印精度。
機油自動平衡裝置，保持各單元油面平衡。
整機采用PLC控制，具有歸零，記憶等功能。（可選用PLC結合觸摸屏控制）
前緣式進紙方式。
網輥：可選用金屬網輥或陶瓷網紋輥，網輥線數可根據用戶要求選擇。
Performance of the main machanisms
Designed According the high request and the reliable function,the operation of the machine is humanization,can accomplish the setting,revision,implement,replacing and memories functing in a shot time,ａnd display with a exact data.
All the drive rollers adopted high quality steel materials,hard chromium plating and the surface treated by lapping finish.
The drives gears adopt high quality alloy steel,after heat treatment and lapping finish.
The main drive roller adopt keyless connect,decrease the connection gap,guarantee the printing presicion.
Lubricata oil automatic balance device,keep the equal oil level equal in each unit.
The machine adopt PLC control,with "automatic zero return"ａnd "memories"function.
Use sun feeder for feed the cardboard.
Customer can chose use steel anilox roller or ceramic roller,the lines of the anilox roller ac so can be chosed accord the customer use.
進紙部
送紙部功能
可連續或隔張紙自動計數。
前緣送紙加大吸風量，送紙更平穩、準確。變頻控制真空氣流和壓力，配合壓扁送入的紙板。
帶紙膠輥為雙層、內層軟外層硬，既保持內層彈性又保證外層耐磨，減少壓扁送入的紙板。
除塵裝置，雙重毛刷和風機可清除紙板表面紙屑，可按紙板尺寸分段調整。
帶紙膠輥間隙，左右擋板位置均用電腦控制。
后托紙架前后采用電動控制，加快了調整速度節省時間。
主機啟動選用保護裝置，機器未鎖時主機無法啟動運轉。
Function of Feeder Unit：
Continous or skip feeding is available with counter.
Sun Automation Lead Edge Feeder with strong vacuum transfer for precise and stable feeding.
Variable frequency drive control for vacuum blower fan for increased or deceased vacuum suction to match different size of vacuum blower fan for increased or decreased vacuum suction to match different sizes of paperboard.
Feeding roll is made of two-layer rubber,inner layer is soft and outer is hard this makes inner layer more flexible and surface more wear-resistant,ａnd reduce the flute damage of the paperboard.
Dust removal system with brush and segmented vacuum sheet cleaner.
Self-locked system adopted for adjusting feeding rolls gap.Motorized and PLC control of feeder side guides.
Motorized backstop forward/backward and up/down position for easy and quick adjustment.
Main motor is protected form starting up when units are not fully closed and locked.
印刷部
真空傳送印刷部功能：
卷軸掛板，左、右兩邊鎖緊裝置，讓掛板對位更準確。
印刷相位調整，電腦及電動控制。
橫向相位，電腦及電子數字控制，控制范圍±10mm。
網紋輥的間隙調整采用電腦及電子式控制，讓刮刀刮墨更均勻。
印刷相位固定裝置，電子離合器制動式剎車機構。當單元分離調整相位清洗時，剎車機構限制齒輪傳動，保持原有齒輪位置固定。
自動切換清洗裝置，讓水墨回收更。
清洗印版后自動復位系統。
Function of Printer Unit With Vacuum Transferring：
Available with either Matthews or Roll mounting system.
Printing register is digitally controlled by motor and PLC.
Transverse register is also digitally controlled by motor and PLC(±10mm).
Quick set and self locking pull collars.
A fixed device of printing register and brake of electromagnetic clutch is used when the is opened. Upened closing the unit,the position are precisely restored so the unit is ready for printing without adjustment.
Cleaning Function can automatically switched to ensure the ink recycling htoroughly.
Automatic resetting after cleaning the printer.
模切部
模切部相位，電腦及電動控制。
橫向相位，電腦及電動控制，控制范圍±10mm。
膠墊與刀模間隙電腦及電動數字控制。
傳送輥調整采用電腦及電動數字式控制。
膠墊輥切削修平結構，保持膠墊平整。
Function of Die-cutter unit：
De-cutting register is digitally controlled by motor and PLC.
The die-cut cylinder cylinder lateral register is digitally controlled by motor and PLC,rang about ±10mm.
Motorized caliper adjustment between anvil roll and die drum.
Auto Speed Compensation system controlled by the independent motor can achieve the superb die accuracy.
Anvil trimmer to keep surface of the anvil covers flat and smooth.
堆疊部
堆疊部功能：
接紙臂可手動或自動操作，設有保險機構，防止接紙臂突然下落，保證操作人員安全。
床臺升降強力鏈條帶動。
堆疊高度為1600mm。
床臺隨紙板堆高自動調整傾斜高度，升降電機，附剎車功能，床臺得以保持固定位置，不會下滑。
氣壓式抬紙機構，在紙板堆疊到預定高度時，接紙托板自動打開，支座托住紙板。
平面皺紋皮帶，防止紙板下滑。
Function of Piling Department：
Installed with safeguard mechanism the paper-receiving arm can operated by hａnd automati-cally in order to prevent the sudden falling down of the paper-receiving arm for the safety of the operating personnel.
The rising and descending of the machine tool platform are driven by the powerful chain.
The height of piling is 1600mm.
With the paperboard's piling to the higher level the machine tool platform automatically adjusts the tilting height,Lifting and descending the electrical machinery.Equipped with the function,so the machine tool can keep the fixed position to prevent falling down.
The organization of lift the paper ty pneumatic motion. The paper receiving tray will automatically open and catch the paperboard while the paperboards are piled to the planned height.
The surface corrugated belt can prevent the sliding of the paperboard.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
包裝印刷網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
