萊力斯克LK-308P工業(yè)吸塵器技術參數
Eli Lisk LK-308P technical parameters of industrial vacuum cleaner
型 號Type | 單位Company | LK-308P |
電 壓 Voltage | V | 220 |
功 率 Power | W | 3600 |
風 量Airvolume | m3/h | 572 |
吸 力Suction | mbar | 205 |
噪 音 noise | dB | 67 |
容 積 volume | L | 80 |
口 徑caliber | mm | 40 |
重 量Weight | KG | 35 |
過濾面積Filter area | cm2 | 11620 |
萊力斯克LK-308P工業(yè)吸塵器特點：
1.LK-308P此款機器采用真空吸塵電機，機器裝置三顆電機，可以根據所吸物質開一顆電機或者二顆電機，三顆電機同時開啟功率可以達到3600W，開關具有防水設計，操作簡單。
2.此款機器可吸塵吸水，配有吸水浮球，當水吸到一定水位時，浮會測式到水位線，自動浮上去機器還是正常運轉，但是沒有吸力，不會造成水直接進到馬達里，起到一個很好的保護電機作用。
3.LK-308P機器的后方有個腳踏板，可以控制吸耙的抬起和放下，工作的時候把腳踏板踩下去，不工作的時候把腳踏板踩上來，推吸扒的安裝也比較簡單，購機后按照說明書上的步驟操作即可，安裝好以后，手推著機器走就可以吸塵了。
4.此款機器適用于:工廠除塵，車間吸塵，車床配套，機械廠吸油污?？晌铮悍蹓m，顆粒，砂石，紙屑，油漆，污垢，切削液，玻璃碎片，打磨除銹，設備配套使用等。
Eli Lisk LK-308P industrial vacuum cleaner features:
1. LK-308P vacuum cleaner motor is used in this machine. The machine is equipped with three motors. One or two motors can be switched on according to the absorbed substance. The power of three motors can reach 3600W at the same time. The switch has waterproof design and simple operation.
2. This machine can absorb water and dust. It is equipped with a water-absorbing float ball. When the water reaches a certain level, the float will measure the water level. The machine will automatically float to the water level. However, without suction, it will not cause water to enter the motor directly, thus playing a very good role in protecting the motor.
3. There is a foot pedal behind the LK-308P machine, which can control the lifting and lowering of the suction rake. When working, the foot pedal is trampled down. When not working, the foot pedal is trampled up. The installation of the push-suction pickup is relatively simple. After purchasing the machine, follow the steps in the instructions. The vacuum rake is 50 cm wide. After installation, the hand-pushed machine will be pushed. The 1250px can be sucked up by the device.
4. this machine is suitable for plant dedusting, workshop vacuuming, lathe matching, and machinery plant for oil absorption. Absorbable: dust, granules, sand, paper scraps, paint, dirt, cutting fluid, glass fragments, grinding and rust removal, equipment supporting use, etc.
