恒暉 H-250氣動平面燙金機
| 功能特點 1 西門子LOGO！控制器控制，確保機器運行穩定可靠。 2 采用歐姆龍溫控器，確保發熱溫度穩定，保證燙印質量。 3 曲肘機構設計，壓縮空氣消耗少，壓力強勁。 4 燙印壓力、溫度、燙壓時間可調。 5 工作臺可自動前后移動，便于安全快速操作。 6 工作臺可前后、左右、旋轉調節。 7 自動送紙、收紙，并可調。 8 加裝光電管（電眼）后可對帶接點的熱轉印紙進行跟蹤到位控制。 9 燙印頭高度升降可調，可燙印較大的工作。 10 設有安全防護裝置，保障操作者的安全。 技術參數 燙板面積:180×230mm 燙板高度調節量 :300mm 燙印整圓直徑: φ70mm 燙印溫度選擇范圍 :室溫~280度 燙金紙卷繞長度:≤300mm 燙印壓力: 2000kgf (7bar) 燙印速度: 1000pcs/hr 電源 :110/220V 60/50Hz 發熱功率: 2000W 耗氣量: 107L/min 重量：287kg |
| |
| Feature 1.Siemens LOGO PLC is used for control together with LCD display to ensure high reliability and stability; 2.Omron Temp.Controller is adopted, so temp.control is accurate and reliable; 3.Adjustment on stamping pressure, temperature and speed available; 4.Crank mechanism design provides strong pressure with little loss; 5.5-digit auto counter built in; 6.Worktable moves lengthwise automatically. It is good for safe and quick operation; 7.Adjustment available on worktable front/rear, left/right and plane angle; 8.Foil feeding and collecting are automatic and adjustable; 9.The foil with dots can be traced and controlled with a photo sensor installed; 10.Protecting device ensures the operator’s safety; 11.The adjusting range of stamp height is wide, so substrate with large size can be printed. Parameter Max. stamping pressure: 19600N; Max. stamping height: 300mm; Size of stamping plate: 180mm×230mm; Stamping temperature adjustable range: 0-280℃; Heating wattage: 2000W; Stamping foil winding length: ≤300 mm; Max. stamping speed: 1000pcs/hr; Air consumption: 107Litre/min; Power: 110/220V 60/50Hz; Outline dimension: 650×1030×1650mm; Weight: 287Kg. |
