Power Master™ 頻率可選毫米波功率分析儀
MA245xxA
Power Master is a frequency selectable mmWave power analyzer that measures the RF power of signals and is powered by USB, in a small form factor
The Power Master is an ultra-portable, USB-based mmWave power analyzer that provides simple, numeric and frequency selective average power RF measurements. The Power Master features two frequency coverage options between 9 kHz to 70 GHz and 9 kHz to 110 GHz. The Power Master provides very broadbａnd power range coverage with a floor as low as -90 dBm.
Many customers are challenged with finding an affordable power sensor that provides broadbａnd frequency and power level coverage as well as a small foot print. The Power Master was created to minimize cost to the customer by removing expensive and unwarranted features that can drive the price of a standard mmWave sensor. The design of the Power Master was to mitigate long measurement times that can be experienced with other mmWave sensor products that are based on thermal components. The Power uses a receiver-based architecture that can not only reduce measurement time, but also allows for frequency-selectivity which provides a more accurate power measurement in the desired frequency band. For foot print, the Power Master is nearly the size of a smart phone, freeing up workbench space.
The Power Master is an all-purpose and robust mmWave power sensor that can used for stand-alone measurements or in a system for calibrating Vector Network Analyzers.
- 低功率容量能夠測量低至 –90 dBm
- 的信號
- 非常適合進行無線測試，尤其是針對擁有較高傳輸損耗的毫米波信號
- 用戶設置能夠控制測量速度和噪聲基底
- PowerXpert 新增 Channel Monitor（通道監視器）模式，可同時監視高達六個頻率通道
- PowerXpert 新增 Power Hunter（功率追尋器）模式，可在一個頻率范圍內搜索高達六個信號
- 安裝孔可實現直接安裝，以便連接探測器進行在片測試
To utilize the powerful capabilities of Power Master, there several features to PowerXpert.
Support for Power Master general settings:
- Measurement mode
- Center frequency
- Span
- Resolution
Power Hunter mode: user defines a frequency range within which Power Master will identify the six highest CW amplitudes and their corresponding frequency
Channel Monitor mode: allows users to select up to six frequency channels (up to 20 MHz wide) and monitor their CW amplitude or channel power simultaneously
To download PowerXpert, visit the Downloads button on this page.
- Microwave Components and Device Characterization
| 型號 | MA24507A | MA24510A |
| 頻率范圍 | 9 kHz — 70 GHz | 9 kHz — 110 GHz |
| 測量范圍 | -90 — +10 dBm | -90 — +10 dBm |
| SWR (x:1) | 9 kHz — ≤ 12.4 GHz 1.29 > 12.4 Ghz — 50 GHz 1.67 > 50 Ghz to — 70 GHz 2.10 | 9 kHz — ≤ 12.4 GHz 1.29 > 12.4 Ghz — 50 GHz 1.67 > 50 Ghz to — 110 GHz 2.10 |
| Amplitude 精度 (db,Typical) | ±1.0 dB, typical | ±1.0 dB, typical |
| 射頻接頭 | V(m) 接頭 | W(m) 接頭 |
會員1.png)
QQ:2568841715
