testo 635-2溫濕度計適用于測量各種材料，表面以及環境中的溫度及濕度。前沿的技術以及大范圍可供選擇的傳感器及探頭實現了這個可能性。

本款儀器需要一個專用的探頭。
請點擊此處選擇探頭。

產品優勢:
可選配濕度、溫度、壓力露點以及壓力探頭
可同時連接2個探頭
超大容量?jī)?nèi)存，可存儲10,000組數據
帶USB數據線以及PC軟件，用于分析，管理和歸檔測量數據

 訂貨號

產品描述
testo 635-2溫濕度計極其適用于空調系統的檢測。多種可供選擇的傳感器和探頭可幫助您測量以下各種參數：
相對濕度
材料含濕量
材料補償水分
壓縮空氣系統的壓力露點
U值
空氣溫度
表面溫度
中心溫度
壓力

儀器主機可同時連接2個探頭。測量結果即時顯示于清晰易讀的顯示屏上。
 

堅固、實用且便于使用

除了可測量多種參數以外，testo 635-2溫濕度計還可顯示/最小值、平均值以及計算室內空氣以及墻面間的露點差。您可以通過這些數據來分析天花板和墻面的潮濕度。個性化配置的特性曲線，確保材料含濕量準確可靠的顯示。 

儀器本身以及操作界面使用起來都簡單及舒適。帶背光燈的顯示器確保您在照明不足的情況下依然能輕松讀取數據，堅固的外殼有效的保護儀器受到外部撞擊。

保存、傳輸并打印數據 –
testo 635-2易如反掌

儀器可創建測量地址，并將該測量地址所測得的數據統一儲存于該地址文件下?？蓜?chuàng)建用戶個性化測量程序或菜單來實施長期測量或材料含濕量測量。儀器內存可存儲高達10,000個測量數據 – 單次測量或程序測量。通過標配的USB數據線可將您的溫濕度計連接至電腦，PC軟件幫助您簡單舒適的進行數據分析、管理以及歸檔工作。

若您還想尋求更簡便的方法：可供選配的testo紅外打印機，可提供現場隨時隨地的數據打印。 testo永遠為您所想。

產品包含

testo 635-2溫濕度計，含專業分析軟件和USB數據線，帶電池和出廠報告。請注意：儀器至少應配置一個探頭或傳感器(標準主機配置中不包括)才能正常工作。

Measuring material moisture

Monitoring the moisture in construction materials and different timber is an important part of everyday work in the most diverse areas. For many users, measuring the material moisture as quickly and as non-destructively as possible is crucial.

Whether it is used to assess the screed drying process, further processing, or the combustibility of wood, our testo 635-2 hygrometer can be used to examine the moisture content in many different construction materials and types of wood.

U-value measurement in old buildings

When redeveloping or renovating old buildings, it is crucial to be able to determine quickly if heat is being lost through the windows and walls. Only then can energy costs be reduced and redevelopment measures carried out efficiently.

When assessing thermal transmission, e.g. in old buildings in need of renovation, the U-value is one of the most important values. It enables thermal assessment and monitoring of the installed material.

3 temperature values are required for calculating the U-value:
 Outside temperature
Surface temperature of the internal wall
Indoor air temperature
 

A radio probe is needed to determine the U-value (order number: ); this is placed in position outside. It transmits the readings to the measuring instrument inside. To measure the surface temperature the three wires of the U-value probe are attached to the wall with plasticine. The air temperature is recorded by a sensor located on the probe plug. The measuring instrument testo 635-2 automatically calculates the U-value from the three values and shows this on the display. The advantage: there is no need for manual calculation; the result is quick and accurate.

 

Localising mould

Damp ceilings and walls may be a result of structural damage. In most cases, however, it is a sign of improper ventilation. Once the mould appears inside a house, the tenant assumes that moisture has come in from outside. Numerous disputes have erupted because of the issue of who is liable for the mould damage. However, it is difficult to find out who or what has caused the mould: the tenant or faulty structural design?

Testo 635-2 is ideal for measuring moisture in ceilings and walls. Using the optional attachment temperature/moisture probe and optional surface temperature probe, the testo 635 automatically calculates the dew point distance. It provides initial information about whether mould is being caused by condensation, or from moisture ingress due to structural damage or faulty insulation.

The supplied PC software can be used to document and analyse the measurement data.

Measuring wood moisture quickly and non-destructively

The testo 635-2 uses the optional attachment scatter field probe (item no.: ) to quickly and non-destructively examine the material moisture in timber. Characteristic curves are available for measuring wood moisture in soft and hard woods, and chipboard. These characteristic curves were developed in cooperation with the LPI institute.

The measurement results are calculated up to a depth of 5 cm and can be recorded at the touch of a button. The readings are displayed in percent by weight in comparison to the dry mass of the material.

Measurement data can be stored and documented using PC software.

Monitoring drying processes

Whether freshly laid screed, or monitored drying of moisture damage, timely determination of the required moisture level will save time and therefore money.

Screeds are laid in the in interior works stage, generally after plastering. The flooring and painting and decorating then follow. The drying behaviour is therefore a significant factor in the works schedule, primarily because the laying of flooring depends on this.

The moisture measurement establishes readiness for flooring; liability for the flooring is thus transferred to the respective trade installing the flooring. An important part of this work is therefore documentation and assurance in the testing for readiness for flooring.

What is the extent of moisture damage and what consequences can be expected in terms of time and costs? These questions have to be answered in order to decide which auxiliary tools and materials are to be used to speed up the drying process.

The t 635-2 and attachment scatter field probe can be used to measure the moisture in the construction material.

Using a thin moisture probe combined with the testo 635-2 the moisture of construction materials can be determined by means of an equilibrium moisture measurement. To do this, the probe has to be inserted in a borehole in the material being measured and sealed. The relevant material characteristic can be manually entered into the device or via software. After several hours, equilibrium with the material has taken place and the testo 635-2 displays the material moisture.
 

Monitoring production and storage conditions

Our temperature/humidity measuring instruments are used around the world in production, storage and server rooms, museums, archives, cold storage warehouses, containers and sales counters.

Manufacturers, carriers, or dealers of sensitive products must ensure that specified temperature or humidity values are observed during production and storage. The testo 635 offers the option of performing spot measurements in relevant places.

The temperature/humidity measuring instrument testo 635-2 offers the user a wide range of humidity/moisture probes. It provides the option of measuring humidity, material moisture and U-value (for the thermal assessment of structural components). In addition to the standard probes, up to three radio probes can be connected to the device in parallel. Measurement results can be analysed, stored and documented using the supplied PC software.