JSR1102運動粘度測定器 一、符合GB/T265和IS03104標準 二、主要技術參數: 水浴容積:250×210×270(mm) 試樣孔數:2孔 控制溫度:20±0.01℃ 控溫方式:數顯溫控儀控制 工作電源:AC220V±10% 50HZ 三、性能及特點: 1、采用電熱管加熱、壓縮機致冷方式,具有噪音低,體積小,壽命長等特點,通電即可工作,且操作簡便。 2、采用數顯溫控儀控制溫度,控溫準確,數字顯示直觀。 3、采用數顯時間繼電器計時,計時準確,數字顯示直觀,且操作方便。 4、恒溫浴背面采用節能燈照明,以提高觀察試驗過程的清晰度。 JSR1102 motor viscometer I. Comply with GB/T265 and IS03104 standards Ii. Main Technical parameters: Water bath volume: 250×210×270(mm) Number of sample holes: 2 Control temperature: 20±0.01℃ Temperature control mode: digital display temperature controller Power supply: AC220V± 10% 50HZ Iii. Performance and Characteristics: 1, using electric heat pipe heating, compressor cooling, with low noise, small volume, long life and other characteristics, power can work, and easy to operate. 2. Adopting digital display temperature controller to control temperature, temperature control is accurate and digital display is intuitive. 3, the use of digital display time relay timing, accurate timing, digital display intuitive, and easy to operate. 4. Energy-saving lamps are used on the back of thermostatic bath to improve the clarity of observation and test process. |