CN401系列分紙壓線機 CN401 Series Rotary Slitting and Creasing Machine
功能及特點Functions and Features:
●適應單、雙、多層楞紙箱生產。
●分紙、切邊、壓痕一次成型。
●結構合理，操作方便。
●Used to produce single, double and multiple corrugated carton.
●Cutting,slitting and creasing in one pass.
●Compact structure and easy operation.
技術參數Technical parameters:
參數型號Model | CN401-2500 | CN401-3000 | CN401-3500 | CN401-4000 |
適用紙板寬幅(毫米) Width of board(mm) | 2500 | 3000 | 3500 | 4000 |
分紙壓線速度（米/秒） Speed of slitting(m/s) | 2 | 2 | 2 | 2 |
整機動力（千瓦）Power(kw) | 1.5 | 2.2 | 2.2 | 3 |
重量（千克）weight（kg） | 1100 | 1600 | 2000 | 2600 |
外型尺寸（長×寬×高）（毫米） Dimension(L×W×H)(mm) | 3000×1200×1170 | 3500×1300×1220 | 4000×1300×1220 | 4500×1330×1260 |
本機包括機體、傳動、工作臺、電機等四大部分。主傳動為二級減速，級為三角皮帶，第二級為齒輪，其傳動部分封閉在護罩內。機架由槽鋼焊接而成整體，結構穩定可靠，保證機器工作過程中運轉平穩。本機有四根工作軸。
對是分紙軸，裝有四組分紙刀完成分切紙板工作。
第二對為壓線輪，完成壓線工作四、操縱與調整
● 開動機器前應了解機器的主要結構與性能，熟悉全部操縱機構的使用。
● 接通電源前檢查電器系統是不是完好，檢查機器電機會不會漏電?！ ?/span>
● 將機器各潤滑部位注滿潤滑油，開動機器空運轉5-10分鐘，查看機器運轉有無不正常的聲音，
如無異常即可開機進行試切紙板?！ ?/span>
● 側擋板的調整 側擋板用于紙板分切時的橫向定位。安裝調整時應使側擋板與分紙軸軸線成90度 角?！ ?/span>
● 分紙刀座、壓線模是利用固定螺栓（底部有銅墊）固定在軸上的。將扳手插入松開螺栓即可在軸 上移動。
●This machine includes four parts: body, drive, worktable, motor and so on. The main drive is two-stage deceleration, the first stage is V-belt, the second stage is gear, and its transmission part is enclosed in the shield. The frame is welded by channel steel, and the structure is stable and reliable to ensure the smooth operation of the machine. This machine has four working shafts.
●The first pair is the paper separating shaft, which is equipped with a four component paper knife to complete the paperboard cutting work.
●The second pair is the pressing wheel to complete the pressing work
●Before starting the machine, you should understａnd the main structure and performance of the machine and be familiar with the use of all operating mechanisms.
●Check whether the electrical system is in good condition and whether the machine motor will leak electricity before connecting the power supply.
●Fill all lubricating parts of the machine with lubricating oil, start the machine to run for 5-10 minutes, and check whether there is abnormal sound during machine operation,
●If there is no abnormality, the machine can be started for trial cutting.
●Adjustment of side baffle: the side baffle is used for transverse positioning of paperboard cutting. When installing and adjusting, make the side baffle and the axis of the paper separating shaft form a 90 degree angle.
●The paper dividing knife base and line pressing die are fixed on the shaft with fixed bolts (copper pad at the bottom). Insert the wrench into the loose bolt to move on the shaft.
QQ:2568841715
