GK-480型全自動輪轉開槽機：把臺面連同框條前后推動，比方要定框條外面釘子的位置就要調臺面后方下面的大螺桿進行定位，要定框條里頭釘子的位置就要調臺面前方下面的大螺桿進行定位，根據自己需要調節定位好之后，再把所需要的釘子放進釘槽。如果模具頭高低不配，就把模具頭的螺絲擰松，換上相配的模具頭。放進角釘，角釘?shù)哪z水面朝上，凸面朝機器后方，放好后，再把送釘器裝上，橡皮筋裝在送釘器后面（啟到擠釘作用），釘子和調位工作做好后，兩根框條就可以放上臺面拼角，人是坐在機器前面工作的，左腳踩腳踏板，機器的夾子就夾住框條，壓桿同時壓下來（注意，手指不要被夾子夾?。?。先打框條里面的的釘子，手指抓住框條中間或臺面的兩支圓桿，把臺面推前，左腳不要松開，右腳再踩釘框。
GK-480 type full automatic rotary slotting machine: the table together with the frame before and after promoting, for example, to frame outside nail position to table below the rear of the big screw positioning, to frame inside nail position we should tune in front of the platform is below the big screw positioning, root according to their own need to adjust a good location, then the need to nail into the nail slot. If the die head is not fit, put the die head screws loose, replaced with a matching die head. Put Brad, facing Brad glue, convex facing the rear of the machine, after that, then the nail feeding device is arranged on, rubber bａnd installed in the nail feeding device behind (Rev to squeeze nail), nails and adjusting the position of the work done, two frame strips can be placed on the table to fight angle, who is sitting in the front of the machine working face, his left foot on the pedal, machine clip clips frame, pressure bar and press down (pay attention to safety, the finger should not be caught in a trap). First hit the box on the inside of the nail, the finger to seize the box in the middle or the table of the two round bar, push the table before, the left foot do not loose, right foot and then step on the nail box.
GK-480型全自動輪轉開槽機技術參數：
切角機重量：70kg電壓：220v功率：1.1kw切釘厚度/寬度：7cm/20cm工作臺面：500x600MM臺面厚度：5mm外形尺寸：65x600x90cm氣缸數/鋸片：無/鋸片釘角機重量：60kg電壓：220v功率：0.1kw切釘厚度/寬度：7cm/15cm工作臺面：400x460MM臺面厚度：10mm外形尺寸：56x63x110cm氣缸數/鋸片：2/氣缸 型號切角機重量：65kg電壓：220v功率：1.1kw切釘厚度/寬度：7cm/20cm工作臺面：600x700MM臺面厚度：7mm外形尺寸：60x70x90cm氣缸數/鋸片：無/鋸片釘角機重量：60kg電壓：220v功率：0.1kw切釘厚度/寬度：7cm/15cm工作臺面：400x460MM臺面厚度：10mm外形尺寸：56x63x110cm氣缸數/鋸片：4/氣缸高 型號切角機重量：65kg電壓：220v功率：1.1kw切釘厚度/寬度：7cm/20cm工作臺面：650x700MM臺面厚度：8mm外形尺寸：65x70x90cm氣缸數/鋸片：有/鋸片釘角機重量：65kg電壓：220v功率：0.1kw切釘厚度/寬度：7cm/15cm工作臺面：400x460MM臺面厚度：10mm外形尺寸：56x63x110cm氣缸數/鋸片：4/氣缸。
GK-480 type automatic rotary slotting machine technical parameters:
Weight: 220V voltage: 1.1KW cutting thickness / width: 500x600MM thickness: 5mm surface size: 65x600x90cm the number of cylinders / saw blade: no screw angle machine weight: 220V voltage: 0.1kw power: 7cm/15cm cutting thickness / width: 400x460MM table thickness: 10mm size: 2/: 220V: 65kg: 1.1KW thickness: 7cm/20cm thickness: 7mm 600x700MM: 60x70x90cm: 60kg: 220V: 60kg: 0.1kw: 400x460MM: 7cm/20cm thickness: 7cm/15cm: 56x63x110cm 10mm 70kg 56x63x110cm number / saw blade: 4/ cylinder high precision angle cutting machine weight: 65K G voltage: 1.1KW power: 650x700MM thickness / width: 7cm/20cm table top: 8mm surface thickness: 65x70x90cm size: 220V cylinder number / saw blade: voltage: 65kg voltage: 220V power: 0.1kw cutting thickness / width: 7cm/15cm working table: 400x460MM mesa thickness: 10mm size: 56x63x110cm cylinder number / saw: 4/ cylinder.
會員1.png)
QQ:2568841715
