GM-1350型瓦楞紙板全自動圓壓圓模切機采用世界 的前緣送紙系統，送紙精度高、、送紙輪壽命長，送紙實現10000張/小時，精度±0.5mm。
GM-1350型瓦楞紙板全自動圓壓圓模切機的版臺和壓切機構兩者的工作部分都是圓筒形的，工作時，送紙輥將紙板送到模壓版滾筒與壓力滾筒之間，由兩者將其夾住對滾筒進行模切，模切版滾筒旋轉一周，就是一個工作循環。
由于瓦楞紙板全自動圓壓圓模切機工作時滾筒連續旋轉，因而其生產效率是各類模切機中高的。但是模切版要彎成曲面，制版比較麻煩，成本也比較高，技術上有 的難度。所以，瓦楞紙板全自動圓壓圓模切機常用于大批量生產。
GM-1350 type of corrugated cardboard automatic rotary die-cutting machine adopts the world advanced front paper feeding system, paper feeding high precision, speed, paper feeding wheel life long, send paper to achieve 10000 / hour, the accuracy of 0.5mm.
GM-1350 type of corrugated cardboard automatic rotary die-cutting machine version and pressing and cutting mechanism of both the working part is cylindrical, work, send paper and paper board sent to molded version of the rollers and pressure between the rollers, by both the the clipped to the cylinder die-cutting, die-cutting, drum rotation turn a week, is a cycle of work.
Due to the corrugated automatic rotary die-cutting machine drum to rotate continuously, thus the production efficiency is the highest in all kinds of die cutting machine. But the die cutting version to be curved surface, plate making more trouble, the cost is relatively high, there is a certain technical difficulty. So, the corrugated board automatic rotary die-cutting machine is commonly used for mass production.
GM-1350型瓦楞紙板全自動圓壓圓模切機模切部：
1、模切輥為優持鋼材質，壁厚30mm，平衡校正，鍍硬鉻。
2、墻板為鑄鐵材質，壁厚50mm，大型加工 制作。
3、軟輥自動修磨機構提高膠套重復使用率，可修磨3-4次。
4、線速度自動補償每一批紙箱的模切尺寸一致。
5、 聚胺脂軟切膠套，安裝方便，模切1200萬次。
6、機械式軟輥左右橫向移動40mm，膠墊磨損均勻。
7、六級精磨齒輪采用40cr材質，噪音低，使用壽命長。
8、模切輥汽缸式自動分離裝置，減少膠套磨損。
GM-1350 type corrugated board automatic rotary die-cutting machine die cutting part:
1, die cutting roller for the excellent steel material, wall thickness 30mm, balance correction, hard chrome plating.
2, the wall plate for the quality of cast iron material, wall thickness of 50mm, large processing center production.
3, the soft roller automatic repair mechanism to improve the rubber sleeve reuse rate, can be repaired 3-4 times.
4, linear speed automatic compensation to ensure that each batch of cartons of die cutting size is exactly the same.
5, imported polyurethane soft cut rubber sleeve, convenient installation, die cutting 12 million times.
6, mechanical soft roll around the horizontal movement of 40mm, rubber pad wear evenly.
7, six fine grinding gear using 40Cr material, low noise, long life.
8, die cutting roller cylinder type automatic separation device, reduce rubber sleeve wear.
GM-1350型瓦楞紙板全自動圓壓圓模切機技術參數：
| 型 號 | 大過紙（mm） | 小過紙（mm） | 過紙厚度 | 過紙速度（片/分） | 主電機功率 | 機器重量 |
| GM 17A | 1700×1200 | 350×500 | 11mm | 30-120 | 4.0kw | 4500kg |
| GM 17A | 2000×1200 | 350×500 | 11mm | 30-120 | 5.5kw | 5000kg |
| GM 20B | 2100×1400 | 400×600 | 11mm | 50-160 | 7.5kw | 5500kg |
| GM 25C | 2400×1400 | 400×600 | 11mm | 50-160 | 7.5kw | 6000kg |
| GM 25C | 2500×1400 | 500×600 | 11mm | 30-100 | 11.0kw | 7000kg |
QQ:2568841715
