上海爾迪儀器科技有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地上海市
包裝印刷網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-10-31 09:43:38瀏覽次數:211次
聯系我時,請告知來自 包裝印刷網
Environmental Chambers Temp. & Humid. Chambers (KH Models)
恒溫恒濕環境箱恒溫恒濕環境箱 (KH系列)
Temp. &Humid. Chambers (KH Models)
恒溫恒濕環境箱(KH系列)
Wide temperaturerange down to -70°C and high advanced safety features forquality and reliability.
溫度可達-70°C,高級別的安全特點確保質量和可靠性。
型號
TH-KH-180
TH-KH-300
TH-KH-408
Features
特點
Temperature & Humidity Control Range
恒溫恒濕環境箱工作范圍
Safety Features
安全特點
· Built in door lock.
· 內置門鎖
· Automatic shut off after overheat alarm.
· 過熱警報后會自動切斷電源
· Low and empty water level alarm.
· 低液位和無浴液報警
· Power supply leakage breaker.
· 漏電斷路功能
· Over current protection.
· 電流過載保護
· Overheat protection.
· 過熱保護
· Door open alarm.
· 開門警報
· Constructional Features
· 結構特點
· Three different volume sizes areavailable to suit any users’ needs.
· 三種尺寸滿足不同用戶需求。
- Various volume sizes, available to suit any users’need.
· - 各種容量可以滿足不同用戶需求
· Advanced performance of low and hightemperature and humidity control, achieved by adapting the humidification tankexterior to the chamber, added benefit for long term test.
· 腔體外部的濕度桶可以使高低溫和濕度控制效果更好,可以長期運行測試。
· Water recycling and purifying systemreduce water consumption for longer operation.
· 水循環系統和凈化系統可以減少水的消耗。
· Corrosion resistance stainless steelchamber and electric polished humidification tank.
· 內腔為不銹鋼可以防腐蝕,濕度桶為電解拋光。
· Air-tight door closure with perfectsealed packing.
· 門具有的密封效果。
- Heat-resistant silicone packing completely blocks high heat leakage from theinner chamber.
· - 抗熱的硅膠填充可以防止腔體內的熱量散失。
- Two-point door latch also enhances tightness to door closure.
· - 兩點式門閂也可以提高門的密封性。
· Energy efficiency is achieved byoptimization of the insulation system.
· 優化的絕緣系統可以更加節約能源。
- Even if the unit is operating at max. temperature, the surface of the unitdoesn’t allow high temperatures of over 60℃
· - 即便在溫度條件下運行,設備表面的溫度也不會超過60℃.
· Maintenance of water supply are easilyperformed with a front water tank.
· 水桶前置,可以方便檢修供水系統。
- Portable water container makes supplying water convenient.
· - 便攜式水桶使得供水更加方便。
· Water supply during operation is alsoavailable for long term test purposes.
· 運行期間也可以供水。
· Direct water system provides user greatconvenience when performing long-term tests. (optional)
· 直水系統方便用戶長時間運行。(選配)
· Clear observation of samples.
· 方便觀察樣品
- Tempered glass door with built in wire heater.
· - 鋼化的玻璃內置電熱絲。
- Energy efficient, long life span LED lighting.
· - LED燈壽命長,也節能。
- Wider view, inner glass door is available for monitoring of samples. (optional)
· - 更大的觀察窗和內部的玻璃門方便觀察樣品狀態。(選配)
· Cable port for external probes or wires.
· 電纜口可連接外部的探測器和電線。
- 50mm diameter cable port comes standard on the left side of the unit.Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
· - 在設備左側標配直徑為50mm的電纜口。額外的50mm或者80mm的電纜口可以定制。
· Casters for easy mobility duringinstallation or relocation.
· 腳輪方便安裝或者重置。
Operating Features
操作特點
· Microprocess PID control / Auto-tuning /Calibration.
· 微處理PID控制器 / 自動調節 / 自動校準功能
· 5.7 inch colorful interactive touch typeLCD controller.
· 設備的控制信號能夠通過5.7英寸彩色LCD顯示屏及時反饋。
· Set value and present value are clearlyvisible together on display.
· 設置值和當前值可以同時在顯示屏顯示。
· Operating progression visible in graphmode allow for direct data interpretation.
· 操作進程可以在圖表里看到,可以直接進行數據讀取。
· Built-in SD card drive.
· 內置SD卡槽
· Tri-lingual language support. (English / Chinese / Korean)
· 支持三種語言模式(英文 / 中文 / 韓文)
· Temperature and other operatingparameters recorded with use of an optional recorder. (optional)
· 選配的記錄儀可以記錄溫度和其它操作參數。
· Sufficient programmable control support.
· 支持編程控制
Description 描述 | TH-KH |
Programmable Pattern Capacity 編程組數 | 120 |
Pattern Repeat Time 每組重復次數 | 999 |
Part repeat time 每段重復次數 | 100 |
Max. Segments per a Pattern 每組最多段數 | 1200 |
Programmable Process Time per a segment 每段編程時間 | 0 to 99 hr 59 min 0~999小時59分鐘59秒 |
* Even thoughthe max. segments per a pattern are 100, available total segments are up to1200 not 12000,
so you need to arrange the number of segment an patterns properly.
* 雖然每組有100段編程,但是最多只能使用1200段,而不是12000段。否則編程模式需要重新設置。
· Computer interface
· 電腦通訊接口
- RS-485 communication port enables connection of up to maximum 9 units.Simultaneous monitoring and operating of multiple units is an availablefeature. (optional)
· - RS-485通訊接口最多可連接9個單元。可以同時監控和操作多個單元。(選配)
- Program patterns are simple to set with the use of our software.
· - 使用軟件可以使編程更加簡單。
- Storage of program information, backup of value settings / recovery, andtemperature values.
· -可以存儲程序信息,設置值備份,復位和溫度值。
- RS-232C port as standard offer.
· 標配RS-232C接口。
Specifications
技術參數
Model 型號 | TH-KH-180 | TH-KH-300 | TH-KH-408 | |
Chamber Volume (L / cu ft) 腔體容積 (L / cu ft) | 189 / 7.4 | 302 / 11.9 | 408 / 14.4 | |
Control System 控制系統 | BDBC2 system - Balanced Dehumidifying & Bath Cooling control BDBC2系統– 平衡除濕 & 冷卻控制 | |||
Controller 控制器 | Programmable, Touch screen type controller (5.7" Color monitor) 可編程,觸摸屏控制器(5.7英寸彩色顯示屏) | |||
Temperature 溫度 | Range (℃ / oF) 溫度范圍(℃ / ℉) | -70 to 150 / -94 to 302 without humidity, 15 to 90 / 59 to 194 with humidity -70 ~ 150 / -94 ~ 302不加濕時, 15 ~ 90 / 59 ~ 194,加濕時 | ||
Fluctuation1) (±℃ / oF) 溫度波動1) (±℃ / ℉) 在40℃ / 75%RH時 | 0.3 / 0.54 | |||
Variation1) (±℃ / oF) 溫度變化1) (±℃ / ℉) 在40℃ / 75%RH時 | 0.5 / 0.9 | |||
Time 時間 | Heating 加熱時間– 無濕度控制時(分鐘) | 70 From -70℃ to 120℃ (-96℉ to 248℉) 70,從 -70℃ ~ 120℃ (-96℉ ~ 248℉) | ||
Cooling 制冷時間– 無濕度控制時(分鐘) | 80 From 20℃ to -70℃ (68℉ to -96℉) 80,從 20℃ ~ -70℃ (68℉ ~ -96℉) | |||
Humidity 濕度 | Range (%RH) 濕度范圍(%RH) | Full Range: 25 to 95 控制范圍:25 ~ 95 | ||
50 to 85 at 15℃ (59℉) 50 ~ 85,在15℃時 (59℉) 40 ~ 90,在20℃時 (68℉) 30 ~ 95,在30℃時 (86℉) 25 ~ 95,從40 ~ 80℃ (104℉ ~ 176℉) 25 ~ 80,在90℃時 (194℉) | ||||
Fluctuation1)(±%RH) at 75%RH / 40℃ 濕度波動1)(±%RH) 在 75%RH / 40℃時 | 0.4 | |||
Variation1)(±%RH) 濕度變化1)(±%RH) | 3 | |||
Refrigeration 制冷 | System 制冷系統 | Mechanical single stage refrigerator system 機械式單級壓縮制冷(空氣冷凝器) | ||
Refrigerant 制冷劑 | R-507A,R-23 | |||
Cooler 冷卻器 | AL Plate fin cooler 散熱片式冷卻器 | |||
Heater 加熱器 | Material 材料 | SUS sheath Heater 不銹鋼護套加熱器 | ||
Sensor 傳感器 | Temperature 溫度 | Pt 100 PT 100 | ||
Humidity 濕度 | Electronic sensor - Free of drying a wet pack and good reaction time 電子傳感器– 具有防水和反應靈敏的特點 | |||
Material 材質 | Interior 內部材質 | Stainless steel #304 304不銹鋼 | ||
Exterior 外部材質 | Stainless steel #304, Steel with powder coating 304不銹鋼粉末噴涂 | |||
Insulation 絕緣材料 | Polyurethane foam 100mm (3.94") 100mm厚聚氨酯泡沫塑料(3.94") | |||
Door 門 | Glass wool 玻璃棉 | |||
Air Flow 氣流 | 2 sets of sirocco fan 2組多葉片式風扇 | |||
Water Supply 供水 | Capacity 容量 | 15L (0.53cu ft) - Cartridge type 15L (0.53cu ft) - 模塊式 | ||
Water Quality 水質 | pH6.2 to 7.2 / Electrical conductivity 20? /cm to below pH值:2 ~7.2 / 電導率:20? /cm以下 | |||
Quantity of Wire Shelves (included / max.) 鋼絲架數量(標配/最多) | 2 / 9 | 2 / 10 | 2 / 10 | |
Distance of between Shelves (mm / inch) 架子間距(mm / inch) | 60 /2.4 | |||
Dimension 尺寸 (WxDxH) | Interior (mm / inch) 內部尺寸 (mm / inch) | 500×630×600 / 19.7×24.8×23.6 | 600×630×800 / 23.6×24.8×31.5 | 600×850×800 / 23.6×33.5×31.5 |
Exterior (mm / inch) 外部尺寸 (mm / inch) | 1043x1613x1558 / 41.1x63.5x61.3 | 1143x1833x1758 / 45.0x72.2x69.2 | 1143x2053x1758 / 45.0x80.8x69.2 | |
Viewing Window (mm / inch) 觀察窗(mm / inch) | 200×330 / 7.9×13 | |||
Net Weight 凈重 (kg / lbs) | 320 / 705.5 | 385 / 848.8 | 410 / 903.9 | |
Cable Port 電纜接口 | Basically one hole provided / ?50mm (2")Optionally max. two holes available / ?50 or 80mm (2 or 3.2") 標配一個電纜接口?50mm (2"); 最多選配兩個電纜接口?50 or 80mm (2" or 3.2") | |||
Interface Port 通訊接口 | Basically RS-232C [RS-485(Maximum 9 Units Control)-optional] 標配RS-232C接口,[選配RS-485接口] | |||
Electrical Requirements (230V, 50Hz) 電源要求(230V, 50Hz) | 3ph / 17.2A | 3ph / 17.3A | ||
Cat. No. 貨號 | AAHC3012K | AAHC3112K | AAHC3212K | |
Electrical Requirements (380V, 50Hz) 電源要求(380V, 50Hz) | 3ph / 10.1A | 3ph / 10.2A | ||
Cat. No. 貨號 | AAHC3014K | AAHC3114K | AAHC3214K |
1) Technical data according to DIN 12880,IEC 60068.
1) 技術參數符合DIN 12880和IEC 60068標準。
※ Permissibleenvironmental conditions: temperature (18 to 30℃)and relative humidity (up to 85%).
※環境條件:溫度(18 ~ 30℃),相關濕度(85%)
※ Allspecifications are under ambient temperature 20℃ (68oF), No load.
所有參數是在室溫20℃ (68℉),沒有承載情況下測得。
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
包裝印刷網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份