印刷部功能：

1、印刷輥采用無縫鋼管，表面研磨，鍍硬鉻，平衡校正，運轉平穩。

2、快速換版裝置，裝卸印版時，腳踏開關電動控制版輥的正反向轉。

3、送紙輥，壓印輥，膠輥，網紋輥間隙調整均采用自鎖結構。

4、印刷輥相位調整均采用PLC以及電動數字輸入式360度調整，停機及運轉時均可調整。

5、印刷輥橫向調整采用PLC及電動數字式調整，調整范圍±10mm。

6、印刷相位固定裝置，氣動式剎車機構，當單元分離調整或清洗時，剎車機構限制齒輪轉動，保持原有齒輪位置固定點。

7、網紋輥采用配合送紙系統氣壓式升降裝置（送紙時網紋輥按單元順序自動落下，停止送紙時按單元順序自動抬起。)

8、氣動隔膜泵上墨，自動循環，加水清洗。

9、擦板記憶功能，清洗印版后可回到原印刷位置。

Function of printing Department:

1.The printing roller adopt without gap roller, surface is treated by lapping finish, after balance correct and hard chrome plating, smooth in operation.

2.Quickly change printing plate device, foot switch for electric control the printing roller’s clockwise and anticlockwise running.

3.The feed roller, press roller, rubber roller and anilox roller space adjustment all adopt self-locking structure.

4.The phase of the printing roller adopt PLC and electric 360°adjust, accord the error to input the sdjust data, can be adjusted while the machine running or stop.

5.The horizontal direction moving of the printing roller adopt PLC and electric adjustment, accord the error to input the adjust data. the adjust scope is ±10mm.

6.The phase fix device adopt cylinder brake, when the unit is opened and washing, the cylinder brake device will brake all the units rolling running and keep the original location of the gears.

7.The automatic Pneumatic control Up and down device of the anilox

roller is synchronous with the cardboard feeding system.(when the cardboard is fed, the anilox roller of each printing unit will automatic orderly go down. when stop feeding, the anilox roller will automatic orderly go up.)

8.Pneumatic membrane pump inking, automatic circle, water washing.

9.With“clean printing plate memory"function, after washing the

printing plate, the printing roller will running back to the original printing position.