MS高速瓦楞紙板生產線

功能介紹：

瓦楞紙板生產線包括軋輥的立場、過膠機、預熱器、輸送機和堆垛機的橋梁，分壓機。我們可以單壁制造，雙層和三墻板生產線有效寬度：400毫米2500mm，6生產速度:100-250m/分鐘。

Corrugated cardboard production line includes gluing machine, pre-heater, con-veyer bridge， machine and stacker.

We can manufacture the single wall, double wall board production line.

Available width:1400mm-2500mm.

Production speed:100-250m/min.

MS-L-380T雙楞單面機

MS-L- 380 T DOUBLE STARE BLANKLY SINGLE MACHINE

用途與特點:

設計速度:200m/min.有效寬幅:1400mm-2500mm令主楞輥:} 380mm(根據楞型不同而有所不同)

壓力輥:} 385mm預熱輥:}400mm0.一臺機有兩組瓦楞輥，工作時可隨意選擇一組另一組預熱備用快速更換楞型令占地面積小(同類產品要實現此種功能熏要兩臺單面機占地面積大)

整機PLC控制觸摸屏顯示運行參數.操作方便令真空吸附式單面瓦楞機上下瓦楞輥采用優質臺金鋼.

經熱處理硬度HRC580  -600令表面經研磨及鍍鉻處理或采用碳化鎢瓦楞輥

獨立驅動箱，五軸傳動，硬齒面齒輪，油泵淋油潤滑，減少噪音，

運轉平穩，延長齒輪的使用壽命

上膠!厚度采用電動推桿調整，隔膠裝!電動。涂膠部在主機停止時獨立運轉，防止?jié){糊枯竭。上膠機構位移氣動控制。

EQUIPMENT下ECHNICAL SPECIFICATIONS

Design speed: 200 m/min今Effective wide: 1400 mm - 1400 mm

The main roller: phi 380 mm (varies according to different type stare blankly). The pressure roller: preheat roll phi 385mm: phi 400 mm

A machine has two groups of corrugated roller, can choose a set of random al work, another set of type quick preheating spare change stare blankly

Cover an area of an area small, similar products to achieve this feature requires two single-sided machine, covering an area of large)

The machine PLC control, touch screen operation parameters, operation is convenient

Vacuum adsorption type single face corrugated machine. Corrugated roller is made of high quality alloy steel, after heat treatment hardness hrc58 0, 60“

Grinding and chrome plated treatment on the surface, or use tungsten carbide corrugated roll Independent drive box, five shaft driving, hard tooth surface gear, pump spray lubrication, reduce noise, smooth operation, prolong the service life of gear.

The gluing quantity thickness is adjusted by electric putter, electric insulation glue device, coating department on the host stops running independently, to prevent the paste to dry up

The gluing displacement pneumatic control

MS-M-380S (405S)吸附式單面機

MS-M一380一S (405 S)ADSORPTION TYPE SINGLE MACHINE

用途與特點:

3805設計速度:200m/min 4055設計速度:220m/min

有效幅寬:1400mm-2500mm楞輥cp380mm

真空吸附式單面瓦楞機。上下瓦楞輥采用優質52CrM。臺金鋼.經熱處理硬度HRC58-600，表面經研磨及鍍鉻處理。

本機內裝有面紙預熱輥及芯紙調制噴氣裝置。

上下瓦楞輥?zhàn)c整機分離設計，可整體吊裝更換，方便更換楞型

涂膠輥及定糊輥設計成組導軌滑移拆裝，縮短維修時間。

上瓦楞輥、壓力輥及上膠輥升降以氣壓控制。

變頻電機主傳動，獨立驅動箱，三軸傳動，由變頻器控制瓦楞機的加減速，達到節能更為日后生產管理留下通訊接口

閉式齒輪傳動油浸潤滑，減少噪音，運轉平穩，延長齒輪的使用壽命。

采用電動隔漿裝置，涂膠部在主機停止時獨立運轉，防止?jié){糊枯竭，電動調整數顯膠f或手動調整上膠皿。上下瓦楞輥及壓力輥軸承均采用高溫潤滑脂，以確保軸承壽命、運轉順暢。

EQUIPMENT TECHNICAL SPECIFICATIONS

3805 design speed', 200 m/min 405 s design speed: 220 m/min effective width: 1400 mm -2500 mm stare blankly roller phi 380 mm.

Vacuum adsorption type single face corrugated machine. 52 crmo fluctuatio一roller Is made of high quality alloy steel, after heat treatment hardness HRC58-60 0, polishing and chrome plated on the surtace treatment

Inside the machine is equipped with surface paper preheat roll and care paper modulation jet device

Corrugated roller up and down separated from the engine design, can change integral hoisting, convenient change stare blankly

Coating design group and set the paste roller guide rail sliding tear open outfit, shorten the maintenance time

On the corrugated roller, pressure roller and glue roller lift with pneumatic control

Main drive, frequency conversion motor drive box independently, three axis transmission, corrugated machine is controlled by inverter deceleration, communication interface to achieve energy saving more production management in the future

Closed gear oil bath lubrication, reduce noise, smooth operation, prolong the service life of gear

The use of electric isolation device, glue on the host stops independent operation to prevent the paste dried up, electric adjustment digital display amount

Top and bottom corrugated roller and pressure roller Gearing adopts high temperature grease, to ensure the bearing life, smooth operation

MS-N-320S(360S)吸附式單面機

SF一320一S (360 S)ADSORPTION TYPE SINGLE MACHINE

用途與特點:

SF320S設計速度:120m/min SF360S設計速度:150m/min

有效幅寬:1400mm-2500mm楞輥:}p320 C}p360) mm

驅動減速箱采用油浸潤滑，減小噪音，萬向節傳動，隔離動力源(選裝)

上瓦輥、壓力輥、涂膠輥升降，均已氣動控制

導紙方式采用真空吸附，帶風童調節裝置，保持高速狀態下瓦楞楞型的穩定。

瓦楞、壓力輥軸承均采用耐高溫潤滑脂潤滑

涂膠部采用自動循環供膠

上下瓦楞輥采用520rMo優質合金鋼，經熱處理，硬度在HRC58-60口襲面經研磨

手動或電動隔膠裝置口

涂膠部停機可獨立運轉或不獨立運轉兩種方式口

EQUIPMENT TECHNICAL SPECIFICATIONS

SF320S design speed: 120 m/mln SF360S design speed: 150 m/mln

The effective width: 1400 mm -2500 mm roller: 320 (360) mm

Drive reducer using oil bath lubrication, reducing noise, cordon drive, isolated power supply (optional)

On tile roller, pressure roller, glue roller lift, have been pneumatic control

Using vacuum adsorption, leading paper with air conditioning, maintain the stability of the state of corrugated type stare blankly at a high speed

Corrugated board, pressure roller bearing adopts high temperature lubricating grease

Using automatic cycle for rubber coating department

And corrugated roller is made of 52 crmo high quality alloy steel, after heat treatment, hardness on the surtace HRC58-60 0 to grind

Manual or electric insulation glue device

Glue the downtime can be independent running or not running in two ways

MS-O-280S吸附式單面機

MS-O一280 S ADSORPTION T丫PE SINGLE MACHINE

用途與特點:

設計速度:80m/mina

有效幅寬:1400mm---2200mmo

楞輥:cp280mm o

驅動減速箱采用浸油潤滑，減少噪音，萬向節傳動，隔離動力源。

上瓦輥、壓力輥、涂膠輥升降、均以氣動控制。

導紙方式采用真空吸附，帶風量調節裝置，保持高速狀態下瓦楞楞形的穩定。

瓦輥壓力輥軸承采用耐高溫潤滑脂潤滑。

涂膠部采用自動循環供膠。

上下瓦楞輥采用520rMo優質鉻相合金鋼，經熱處理，硬度在日RC58-60“表面經研磨。

涂膠輥表面經過網紋刻花及鍍鉻處理。

手動或電動隔膠裝i。

涂膠部停機可獨立運轉或不獨立運轉兩種方式，主電機變頻控制(選裝)。

EQUIPMENT TECHNICAL SPECIFICATIONS

Design speed: 80 m/min

Effective width: 1400 mm一2200 mm

Roll: phi 280 mm

Drive reducer with immersion oil lubrication, reduce noise, cardan drive, isolated power supply

On tile roller, pressure roller, glue roller Ilft, all with pneumatic control

Using vacuum adsorption, leading paper with air conditioning, maintain the stability of high speeds corrugated stare blankly shape

Tile roller pressure roller bearings using high temperature lubricating grease

Using automatic cycle for rubber coating department

And corrugated roller adopt 52 crmo high quality chromium molybdenum alloy steel,after heat treatment, hardness on the surface HRC58-60 0 to grind

Rubber roller surface treated with reticulate hand-cut and chrome plated

Manual or electric insulation glue device

Glue of downtime can be independent running or not running in two ways, main motor frequency conversion control (optional)

MS-P重型液壓無軸支架

MS-P HEAVY DUT丫HYDRAULIC BRACKET

用途與特點:

采用雙輥筒對稱四支臂結構，可同時支撐兩卷原紙。

通過液壓控制紙卷升降，電動機械控制紙卷加緊糾偏。

采用意大利進口多點式剎車裝置，自動膨脹式夾紙頭，減少紙張浪費。

支撐原紙幅寬:1200-2800mm

支撐原紙直徑cp1500mm

支撐重量5t

主軸:cp270mm

EQUIPMENT丫ECHNICAL SPECIFICATIONS

With double roller symmetrical four arm structure, at the same time support two volumes base paper

Through hydraulic control paper roll lift, electric machinery control paper roll press rectification.

Using imported Italian multipoint brakes, automatic expansion type paper, reduce the waste of paper.

Support base paper width: 1200-2800一mm

Support base paper biggest phi 1500 mm in diameter

Support maximum weight 5 t.

Spindle: cp270 mm

MS-Q型電動無軸紙架

MS-Q T丫PE ELECTRIC SHAFTLESS PAPER PLANE

用途與特點:

支撐原紙直徑1400mmo

支撐重量2t o

采用單滑道對稱四支臂結構，可同時支撐兩卷原紙。

裝有圓盤式手動制動器，可隨時調整原紙張力。

支臂的加緊，旋轉機械設有衡定扭力離合器，操作安全可靠。

EQUIPMENT TECHNICAL SPECIFICATIONS

Support base paper 1400 mm in diameter.

Support maximum weight 2 t.

Adopts single slide symmetrical four arm structure, at the same time support two roll of base paper.

Equipped with manual brake disc type, can adjust the tension of base paper.

To arm, rotating machinery is equipped with uniform torsion clutch, safe and reliable operation

M S -R系列預熱缸

MS-R SERIES OF PREHEATING C丫LINDER

用途與特點:

預熱輥直徑:cp600mm, cp800mm. cp900mm, cp1100mm任選。

有效幅寬:1400mm-2200mm 0

電調包角，調整范圍600-27000

各輥表面經精密磨削鍍硬鉻處理，光潔，耐用。

采用蝶形封頭或平頭設計，保證原紙受熱均勻。

可單層或多層配置。

EQUIPMENT TECHNICAL SPECIFICATIONS

Preheat roll diameter: phi phi phi phi 800 mm to 800 mm, 600 mm, 1100 mm optional.

The effective width: 1400 mm一1400 mm.

Electrical switch Angle, adjusting range 60 0-270“.

The roll surface by precision grinding hard chromium plating processing, bright and clean, durable

The butterfly head or flat design, ensure the base paper heated evenly.

Can be single or multi-layer configuration.

MS-T型二重涂膠機

MS-T DOUBLE GLUE MACHINE

用途與特點:

設計速度:200m/min o

涂膠輥表面記刻有特殊網紋。鍍硬鉻處理，涂膠均勻，耗膠量少

涂膠輥的轉動由變頻器控制，由變頻器控制保證涂膠輥的線速與雙面機同步，又可以獨立運轉。

電動調整數顯膠量或手動調整上膠量

壓紙輥采用啟動上升，間隙由電動微調

自動循環供膠，能有效控制膠量，避免膠水沉淀，保證良好的膠水和節約膠水。

可選擇壓輥加壓或彈性觸壓棒加壓方式。

EQUIPMENT TECHNICAL SPECIFICATIONS

Design speed: 200 m/min.

Rubber roller surface engraved with special checker. Hard chromium plating processing, uniform coating, glue consumption quantity is little.

Glue roller rotation is controlled by frequency converter, the inverter control to ensure that the glue roller line speed synchronization with double-sided machine, can operate independently.

Electric adjustment digital display amount or manually adjust the gluing quantity

Pressure roller adopt start rising, clearance by electric

Automatic cycle for the glue, can effectively control the glue amount, avoid glue precipitation,ensure good glue and glue saving.

Can choose roller pressure or elastic contact pressure mode.

MS-U電腦橫切機

MS-U COMPUTER CROSS-CUTTING MACHINE

用途與特點:

合理的機械結構，剛性強、穩定性好、使用壽命長;

所有操作控制在同一側面，操作方便，光電計數;

切紙范圍縱切四刀，橫切400-2400mm o

切紙精度士2.5mm o

EQUIPMENT TECHNICAL SPECIFICATIONS

Reasonable mechanical structure, strong rigidity, good stability, long service life;

All operating controls on the same side, easy to operate, photoelectric counting;

Paper cutting range four knife slitting, crosscutting 400-2400 mm。

Paper cutting accuracy士2.5 mm.

MS-W升降型薄刀機電動調刀型

MS-W TYPE THIN BLADE MACHINE ELECTRIC ADJUSTABLE BLADE TYPE

用途與特點:

采用五點壓線，壓痕間隙同步調整。線性美觀，不爆線，由于折彎

磨刀裝置采用自動和手動兩種氣動磨刀方式，邊磨刀邊工作，提高工作效率

電動升降電動糾偏，操作簡單實用，適用不同生產線的需要。

采用變頻電機變頻器，與生產線同步精度高。

電器采用國內或進口產品，性能可靠。

EQUIPMENT TECHNICAL SPECIFICATIONS

Use five line pressing, indentation clearance synchronous adjustment. Linear and beautiful, not line, due to the bending.

Automatic knife grinding device and manual two kinds pneumatic grinding way, knife while working, improve work efficienc

Electric hoist electric correction, the operation is simple and practical, applicable to the needs of different production line.

Use famous inverter frequency conversion motor, and the production line of high precision

Electric used domestic famous brands or imported products, reliable performance

MS-X普通型薄刀機

MS-X ORDINARY THIN BLADE MACHINE

用途與特點:

采用前壓線送紙。后雙膠袖牽線，紙板運行平穩

分切部:采用優質鴿鋼臺金刀片，刀鋒鋒利，使用壽命長，分切出的紙板切口整齊，無壓裂，毛刺

壓痕部:采用五點壓線，壓痕間隙同步調整。線型美觀，不爆線，易于彎折

電動糾偏:操作簡單實用，適應不同生產線的需要

磨刀裝置采用電動和手動兩種氣動磨刀萬式。邊磨刀邊工作，提高工作效率.

電器采用國內或進口產品，性能可靠。

EVUIPMENI花CHNICAL SPECIFICATIONS

AHerbyfalmerprwsee.llne paper, double roller,sldngs,cardboard smooth operation

CNHng depeMaenH adopt吻h qualify Wngsfen alloy blades,Ihe blade sharp,lonA servlcelife and cuffing out the cardboardinclsion neafly,withcuflracturipq,burr.

Line presalaqlndenteflon depBllmenCthe hve,areaslnH clearance synchronous edJustmenL Llneerａnd eaufllu nooline.easyto bend

Elechic wrredlon: the operefion is simple, prectlcel, end adapt to the needs of dferent production Ilne

Knife grinding device ofelechia and manuallwo k7nds pneumatic grlndinA way, knife whileworkinA=Impmve work eHlciency

Eleplric used domeslicfamous brands orimporfed producls,reliabls performance

MS-Y電動調刀型薄刀機

MS一丫ELECTRIC KNIFE T丫PE THIN KNIFE MACHINE

用途與特點:

采用前壓線送紙，后雙膠軸牽線，紙板運行平穩。

采用電動調整刀距，氣動自動鎖緊，提高機器的自動化程度。使用方便，調整準確.勞動強度。

分切部:采用優質鎢鋼合金刀片，刀鋒鋒利，使用壽命長，分切出的紙板切口整齊，

壓痕部采用五點壓線，壓痕間隙同步調整，線性美觀，不爆線，易于彎折。

磨刀裝里采用自動和手動兩種氣動磨刀方式，邊磨刀邊工作，提高工作效率。

電器采用國內品牌或進口產品，性能可靠。

EQUIPMENT TECHNICAL SPECIFICATIONS

Using electric adjusting clearance, start the automatic locking, improve the degree of automation of the machine.丁he precise easy to use, adjustment, save time, reduce the labor intensity.

Cutting department: adopt high quality tungsten alloy blades, the blade sharp, long service life and cutting out the cardboard incision neatly, without fracturing, no burr

Line pressing indentation deparUnent adopts fve, creasing Gearance synchronous adjustment, linear and beautiful, not line, easy to bend

Automatic knife grinding device and manual two kinds pneumatic grinding way, knife while working, improve work efficiency.

Electrical appliances used domestic brａnd or import product, reliable in pertormance.