Hawke CSB 656N Cable Gland（霍克電纜接頭）
Application
Outdoor or indoor use.
For use with conduit incorporating individual insulated conductors or for particular use with:-
a） Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b） Cables that exhibit ‘cold flow’ characteristics.
c） Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.
Features
Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable or conduit.
Seals conductors at entry to enclosure via conduit or enables an existing cable gland to be converted to a barrier type cable gland.
The device is fitted with a simple compound filled chamber which permits packing around individual insulated conductors.
Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides female running coupler for cable gland or conduit entry.
Materials & Finishes
The CSB 656N cable gland is manufactured in Brass （standard）, Nickel Plated Brass, 316 Stainless Steel or Aluminum.
Brass NPT entries are nickel plated as standard.
Technical Data
Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0058X.
IECEx Certificate No. IECEx BAS 06.0015X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 （30 metres for 7 days） to IEC/EN 60529 and NEMA 4X.
Deluge Protection to DTS01.
Operating Temperature Range: -60°C to +80°C.
Alternative certification options available:
Exd IIC/Exe II.
GOST R-Exe IIU.
GOST K - Approved for use in Kazakhstan.
Hawke CSB 656N Cable Gland
| CABLE GLAND SELECTION TABLE | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Male Entry Thread Size | Female Entry Thread Size | Inner Sheath/ Cores | 'G' Compressed Length | Hexagon Dimensions | ||||||||
| Metric | NPT * | Metric | NPT * | ‘B’ Max. Over Cores | ‘E’ Max. Inner Sheath | Max. No. Of Cores | Across Flats | Across Corners | |||||
| Standard | Option | Standard | Option | ||||||||||
| A | M20 | ¾" | ½" | M20 | ¾" | ½" | 11.0 | 12.5 | 10 | 74 | 30.0 | 32.5 | |
| B | M25 | 1" | ¾" | M25 | 1" | ¾" | 16.2 | 18.4 | 21 | 65 | 36.0 | 39.5 | |
| C | M32 | 1¼" | 1" | M32 | 1¼" | 1" | 21.9 | 24.7 | 42 | 80 | 46.0 | 50.5 | |
| C2 | M40 | 1½" | 1¼" | M40 | 1½" | 1¼" | 26.3 | 29.7 | 60 | 83 | 55.0 | 60.6 | |
| D | M50 | 2" | 1½" | M50 | 2" | 1½" | 37.1 | 41.7 | 80 | 94 | 65.0 | 70.8 | |
| E | M63 | 2½" | 2" | M63 | 2½" | 2" | 47.8 | 53.5 | 100 | 97 | 80.0 | 88.0 | |
| F | M75 | 3" | 2½" | M75 | 3" | 2½" | 59.0 | 66.2/65.3 † | 120 | 100 | 95.0 | 104.0 | |
| All dimensions in millimetres （except * where dimensions are in inches）. Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT male entry option. Hexagon dimensions as shown may alter. | |||||||||||||
Ordering Information
Cable Gland Type/Size/Male Thread/Female Thread
e.g. CSB 656N/C/M32/M32
CSB 656N/C/1¼" NPT/M32
Two part sealing compound and assembly instructions are supplied with the cable gland.
If the CSB 656 cable gland is required please contact our Technical department.
