
產品型號:JSH2502
產品名稱:防銹性能試驗器(JSH2502)
產品說明:
JSH2502防銹性能試驗器
一、符合GB/T11143、ASTM D665標準
二、主要技術參數:
控溫范圍:常溫~60℃
控溫精度:±1℃
控溫方式:數顯溫控儀控溫
加熱方式:電熱管加熱
試樣孔數:4孔
熱浴攪拌:電機攪拌
試樣攪拌:減速電機攪拌 1000±50r/min(數字顯示)
功 率:2KW
工作電源:AC220V±10% 50HZ
三、性能及特點:
1、本儀器可同時做四個樣,采用一機四孔分別攪拌方式,四個攪拌電機分別獨立控制,可以滿足試樣攪拌速度1000±50r/min;
2、采用數顯溫控儀控溫,具有控溫準確,顯示直觀;控制溫度可設定在常溫~60℃范圍內任意一點;
3、采用數顯計時器計時,計時準確,顯示直觀;
JSH2502 anti-rust tester
I. Comply with GB/T11143 and ASTM D665 standards
Ii. Main Technical parameters:
Temperature control range: normal temperature ~ 60℃
Temperature control accuracy: ±1℃
Temperature control: Digital display temperature controller
Heating mode: Electric heat pipe heating
Number of sample holes: 4
Hot bath stirring: Motor stirring
Sample stirring: speed reduction motor stirring 1000±50r/min (digital display)
Power: 2 kw
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. The instrument can make four samples at the same time, and adopts a machine with four holes for separate stirring, and four stirring motors are independently controlled, which can meet the sample stirring speed of 1000±50r/min;
2. Adopt digital display temperature controller to control temperature, with accurate temperature control and intuitive display; The control temperature can be set at any point within the range of normal temperature ~ 60℃.
3. Use digital display timer for timing, accurate timing and intuitive display;