
產品型號:JSR1104運動粘度測定器
產品名稱:運動粘度測定器(JSR1104)
產品說明:
JSR1104運動粘度測定器
一、符合GB/T265和IS03104標準
二、主要技術參數:
試驗溫度:常溫~100℃
控溫精度:±0.1℃
攪拌方式:電機攪拌
溫控方式:進口數顯溫控儀控制
功 率:2500W
工作電源:AC220V±10% 50HZ
三、性能及特點:
1、儀器加熱采用電熱管加熱方式,數顯溫控儀控制溫度,控溫準確,數字顯示直觀。
2、儀器電源和浴缸分上下層連接,浴缸下面采用節能燈照明。
3、采用電機攪拌減少浴缸內液體的溫度梯度;儀器采用夾層熱浴,控溫準確,安全可靠。
JSR1104 kinematic viscosity tester
I. Comply with GB/T265 and IS03104 standards
Ii. Main Technical parameters:
Test temperature: normal temperature ~ 100℃
Temperature control accuracy: ±0.1℃
Stirring mode: motor stirring
Temperature control mode: imported digital display temperature controller
Power: 2500 w
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1, the instrument heating adopts electric heat pipe heating, digital display temperature controller control temperature, temperature control is accurate, digital display intuitive.
2. The instrument power supply is connected to the bathtub at the upper and lower levels, and energy-saving lamps are used below the bathtub.
3, the use of motor stirring to reduce the temperature gradient of the liquid in the bathtub; The instrument adopts interlayer hot bath, accurate temperature control, safe and reliable.