WAX-1液相色譜柱（064985）
Acclaim 混合基質(zhì)WAX-1色譜柱—難分離物質(zhì)輕松搞定!
Reversed-phase and weak anion-exchange properties on a single column
The novel column chemistry of the Acclaim Mixed-Mode WAX-1 results in a multimode separation mechanism including hydrophobic, anion-exchange, and cation-exclusion interactions.Consequently, retention of basic, neutral, and acidic molecules can be either independently or concurrently adjusted by changing ionic strength, pH, and organic solvent content in the phase.
? Adjustable selectivity
? Selectivity orthogonal to reversed-phase (RP) columns
? Ideal selectivity for anionic molecules
? Simultaneous separation of acidic, basic, and neutral molecules
? Multimode retention mechanisms: reversed- and normal phase, anion-exchange, cation-exclusion, and HILIC modes
The Acclaim Mixed-Mode WAX-1 column combines hydrophobic and anion -exchange characteristics, on a 5 μm high-purity,porous silica with 120-? diameter pores. Because of this unique chemistry, the Acclaim Mixed-Mode WAX-1 column also provides complimentary selectivity to C18 reversed-phase columns.
Hydrophilic organic acids are often difficult to separate with common RP columns, since hydrophobic retention alone is inadequate to differentiate molecules with similar hydrophobicities.This can be overcome using the Acclaim Mixed-Mode WAX-1 column; it provides sufficient retention, and idealselectivity for a variety of anionic molecules, even for weakly charged molecules.
訂購信息：
| Analytical Columns | |
|---|---|
| Acclaim Mixed-Mode WAX-1, 3µm Analytical, (3.0 x 150mm) | 070088 |
| Acclaim Mixed-Mode WAX-1, 3µm Analytical, (3.0 x 50mm) | 071908 |
| Acclaim Mixed-Mode WAX-1, 3µm Analytical, (2.1 x 150mm) | 070089 |
| Acclaim Mixed-Mode WAX-1, 5 µm (4.6 x 150 mm) | 064984 |
| Acclaim Mixed-Mode WAX-1, 5 µm (4.6 x 250 mm) | 064985 |
| Acclaim Mixed-Mode WAX-1, 5 µm, 2.1 x 150 mm | 067084 |
| Guard Columns | |
|---|---|
| Acclaim Mixed-Mode WAX-1, 5 µm Guard Cartridges (4.6 x 10 mm), 2 ea (use V-2 Holder) | 069704 |
| Acclaim Mixed-Mode WAX-1, 5µm Guards (3 x 10mm), 2ea, requires holder 069580 | 071909 |
| Acclaim Mixed-Mode WAX-1, 5µm, Guards (2.1 x 10mm), 2 ea; requires holder 069580 | 069686 |
| Acclaim SST Guard Cartridge Holder V-2 | 069580 |
| Acclaim Guard Kit (Holder and coupler) V-2 | 069707 |
| Guard to Analytical Column Coupler V-2 | 074188 |
